The Kubota B5200 coolant capacity is listed as 1.66 gal (6.3 L). It also lists coolant type ethylene glycol-based coolant and Kubota Genuine Coolant and antifreeze mix Kubota recommends a 50: 50 ethylene glycol-based coolant-to-water mix for the B5200 tractor.
Kubota B5200 Coolant Capacity
| Cooling system capacity | 1.66 gal (6.3 L) |
|---|---|
| Radiator capacity | 1.66 gal (6.3 L) |
| Coolant type | ethylene glycol-based coolant and Kubota Genuine Coolant |
| Antifreeze mix | Kubota recommends a 50: 50 ethylene glycol-based coolant-to-water mix for the B5200 tractor |
| Coolant change interval | every 1,500 hours |
| Engine horsepower | 13 hp (9.7 kW) |
| Engine displacement | 0.8 L (48.8 cu in) |
Coolant Capacity Comparison Chart
Coolant capacity comparison
Engine horsepower comparison
Engine displacement comparison
Kubota B5200 Coolant and Engine Notes
| Coolant capacity note | For the Kubota B5200, 1.66 gal (6.3 L) is the main coolant capacity captured. Use it as a refill planning number, then confirm the final level at the machine |
|---|---|
| Radiator capacity note | The Kubota B5200 radiator figure is 1.66 gal (6.3 L). Treat it as radiator context, not always the complete refill amount |
| Coolant type note | For the Kubota B5200, coolant type matters as much as capacity. The clean captured value is ethylene glycol-based coolant and Kubota Genuine Coolant |
| Antifreeze mix note | The Kubota B5200 antifreeze mix is listed as Kubota recommends a 50: 50 ethylene glycol-based coolant-to-water mix for the B5200 tractor. That is the normal protection range for freezing, boiling and corrosion control |
| Coolant change interval note | For the Kubota B5200, the service interval is listed as every 1,500 hours. Time matters too, not just engine hours |
| Engine context note | For the Kubota B5200, the supporting engine specs are engine horsepower 13 hp (9.7 kW) and displacement 0.8 L (48.8 cu in). Use them as context beside the coolant capacity, not as a replacement for the manual |
| Refill note | The practical service move for the Kubota B5200: buy enough coolant for 1.66 gal (6.3 L), fill to spec, run the engine, then recheck the radiator and overflow bottle after cooling |
Kubota B5200 Coolant Capacity FAQ
What is the Kubota B5200 coolant capacity?
The Kubota B5200 coolant capacity is listed as 1.66 gal (6.3 L) for cooling system capacity. Use this as the refill planning number and confirm the final level at the radiator or overflow bottle.
Can I use any coolant in the Kubota B5200?
No. Use ethylene glycol-based coolant and Kubota Genuine Coolant or a coolant that clearly matches the manual’s required spec. Wrong coolant can create corrosion, deposits or seal problems.
Is premixed coolant okay for the Kubota B5200?
Premixed coolant can be fine if it matches ethylene glycol-based coolant and Kubota Genuine Coolant and the required mix. The captured mix for the Kubota B5200 is Kubota recommends a 50: 50 ethylene glycol-based coolant-to-water mix for the B5200 tractor.
How often should I change coolant in the Kubota B5200?
The captured coolant change interval for the Kubota B5200 is every 1,500 hours. If service history is unknown, changing it is usually smarter than guessing.
Why does the Kubota B5200 coolant amount differ from other models?
Coolant capacity changes with engine and radiator setup. For the Kubota B5200, the supporting engine data is horsepower 13 hp (9.7 kW) and displacement 0.8 L (48.8 cu in).
Mistakes do happen. Tractor coolant specs can change by year, market, engine, radiator, cab/heater setup and service procedure. Please check the operator manual, decal information and official kubotausa.com website for official information before draining or refilling the cooling system.
