The Komatsu SK1026-5 turbo skid-steer battery size is Group 31, and it uses a 12-volt electrical system. Its 800 CCA rating is high for Komatsu skid-steers in this dataset.
ModelSK1026-5 turbo
BrandKomatsu
Voltage12 V
EquipmentSkid Steer
Voltage
12 V
Cold cranking
800 CCA
Battery size
Group 31
Battery location
See details below
How this battery compares
Compared with other Komatsu skid-steer battery ratings in this dataset.
Cold cranking amps800 CCA
High
LowAverageHigh
Low 600 CCAMedian 600 CCAHigh 1050 CCA
BA
Battery specification
Model-specific replacement data
System voltage
12 V
Battery group size
Group 31
Cold cranking amps
800 CCA
RP
Replacement battery
What to match when buying
The Komatsu SK1026-5 Turbo skid steer loader typically uses a Group 24 battery with a recommended cold cranking amps (CCA) rating of at least 600. It's advisable to check with a dealer for specific battery options that fit your needs.
LC
Battery location
Where the battery is mounted
The battery on the Komatsu SK1026-5 Turbo skid steer loader is typically located under the seat or in the rear compartment of the machine. For specific battery specifications and replacement details, it's best to consult the owner's manual or the manufacturer's website.
ID
Model details
Equipment identity
Brand
Komatsu
Model
SK1026-5 turbo
Equipment class
Skid-Steer Loader
HOW
How to replace the battery
Basic replacement procedure
A Komatsu SK1026-5 turbo skid steer loader uses a 12-volt maintenance-free wet battery; replacement requires disconnecting the negative cable first, removing the old battery, installing the new one, and reconnecting the positive cable then the negative cable while observing polarity.
!
Bad battery symptoms
Signs the battery may be failing
Common signs are slow or no cranking, repeated clicking from the starter/solenoid, dim or flickering lights/display, electronics resetting during crank, needing frequent jump-starts, rapid self-discharge, corroded/swollen battery case, or resting voltage that quickly falls under load. Confirm cable condition and alternator output before condemning the battery.
?
What battery size fits the Komatsu SK1026-5 turbo?
Quick answer
Group 31. Best available fitment is based on closest same-brand/model-family match (SK1020-5 Super Flow); confirm tray dimensions, terminal layout, and serial number before ordering.
?
How many CCA does the Komatsu SK1026-5 turbo need?
Quick answer
The recommended battery for the Komatsu SK1026-5 Turbo Skid Steer Loader typically has a Cold Cranking Amps (CCA) rating of around 800 CCA. It's important to verify the specific requirements in the owner's manual or with a dealer for the exact specifications.
?
What voltage battery does the Komatsu SK1026-5 turbo use?
Quick answer
The official battery voltage for the Komatsu SK1026-5 turbo skid steer loader is 12 volts. For replacement, it's important to ensure compatibility with the specific model's requirements.
?
Where is the battery on the Komatsu SK1026-5 turbo?
Quick answer
The battery on the Komatsu SK1026-5 Turbo skid steer loader is typically located under the seat or in the rear compartment of the machine. For specific battery specifications and replacement details, it's best to consult the owner's manual or the manufacturer's website.
?
What is the best replacement battery for the Komatsu SK1026-5 turbo?
Quick answer
The Komatsu SK1026-5 Turbo skid steer loader typically uses a Group 24 battery with a recommended cold cranking amps (CCA) rating of at least 600. It's advisable to check with a dealer for specific battery options that fit your needs.
Disclaimer: Battery specifications are for general reference and may vary by year, serial number or configuration. Always verify fitment and electrical requirements before purchase or installation. See the Komatsu website for manufacturer information.
