The Komatsu SK820-5E0 skid-steer battery size is Group 31, and it uses a 12-volt electrical system. Its 600 CCA rating is average for Komatsu skid-steers in this dataset.
ModelSK820-5E0
BrandKomatsu
Voltage12 V
EquipmentSkid Steer
Voltage
12 V
Cold cranking
600 CCA
Battery size
Group 31
Battery location
See details below
How this battery compares
Compared with other Komatsu skid-steer battery ratings in this dataset.
Cold cranking amps600 CCA
Average
LowAverageHigh
Low 600 CCAMedian 600 CCAHigh 1050 CCA
BA
Battery specification
Model-specific replacement data
System voltage
12 V
Battery group size
Group 31
Cold cranking amps
600 CCA
RP
Replacement battery
What to match when buying
Komatsu SK820-5E0 skid steer loader batteries are available through Komatsu's partnership with Exide, with the full Exide catalogue offered at Komatsu branches in Australia. Komatsu Australia provides Exide battery solutions and advises customers to call 1300 566 287 for battery inquiries.
LC
Battery location
Where the battery is mounted
The battery on the Komatsu SK820-5E0 skid steer loader is typically located under the seat or in the rear compartment of the machine. For specific replacement specifications, it's best to consult the owner's manual or a parts supplier for detailed information.
ID
Model details
Equipment identity
Brand
Komatsu
Model
SK820-5E0
Equipment class
Skid-Steer Loader
HOW
How to replace the battery
Basic replacement procedure
Park on level ground, lower the lift arms/attachment, stop the engine, remove the key and isolate electrical power. Open the battery access, disconnect the negative cable first and then positive, remove the hold-down and lift out the battery. Clean the tray/terminals, install the replacement securely, connect positive first and negative last, then verify charging voltage and starting operation.
!
Bad battery symptoms
Signs the battery may be failing
Common symptoms of a bad battery in a Komatsu SK820-5E0 skid steer loader include difficulty starting the engine, dimming lights, and electrical issues. For battery specifications and replacement, refer to the manufacturer's guidelines or the service manual.
?
What battery size fits the Komatsu SK820-5E0?
Quick answer
The official battery group size for the Komatsu SK820-5E0 skid steer loader is Group 31. For replacement, it's recommended to check with authorized dealers for the specific battery specifications.
?
How many CCA does the Komatsu SK820-5E0 need?
Quick answer
The recommended battery for the Komatsu SK820-5E0 skid steer loader typically has a Cold Cranking Amps (CCA) rating of around 600 CCA. Always check the specific model's manual or consult with a dealer for precise specifications.
?
What voltage battery does the Komatsu SK820-5E0 use?
Quick answer
The official battery voltage for the Komatsu SK820-5E0 skid steer loader is 12 volts. For replacement, it's important to ensure compatibility with the specific model's requirements.
?
Where is the battery on the Komatsu SK820-5E0?
Quick answer
The battery on the Komatsu SK820-5E0 skid steer loader is typically located under the seat or in the rear compartment of the machine. For specific replacement specifications, it's best to consult the owner's manual or a parts supplier for detailed information.
?
What is the best replacement battery for the Komatsu SK820-5E0?
Quick answer
Komatsu SK820-5E0 skid steer loader batteries are available through Komatsu's partnership with Exide, with the full Exide catalogue offered at Komatsu branches in Australia. Komatsu Australia provides Exide battery solutions and advises customers to call 1300 566 287 for battery inquiries.
Disclaimer: Battery specifications are for general reference and may vary by year, serial number or configuration. Always verify fitment and electrical requirements before purchase or installation. See the Komatsu website for manufacturer information.
