The John Deere Z335E deck belt part number found is M154958. The deck belt length found is 95.5 in (2,426 mm). The drive belt part number found is M154202. The drive belt size found is 95.5 in (2,426 mm) long by 0.5 in (13 mm) wide.
John Deere Z335E Belt Size and Part Numbers
| Mower deck belt part number | M154958 |
|---|---|
| Mower deck belt length | 95.5 in (2,426 mm) |
| Drive belt part number | M154202 |
| Drive belt length | 95.5 in (2,426 mm) |
| Drive belt width | 0.5 in (13 mm) |
Belt Size Comparison Chart
Belt length comparison
Belt width comparison
John Deere Z335E Belt Notes
| Mower deck belt note | The John Deere Z335E deck belt listing shows part number M154958 with length 95.5 in (2,426 mm). Confirm the belt against the deck tag, belt decal or parts diagram before ordering |
|---|---|
| Drive belt note | The John Deere Z335E drive or transmission belt listing shows part number M154202, length 95.5 in (2,426 mm) and width 0.5 in (13 mm). Treat it as partial drive-belt data if no matching width or OEM part number is shown |
| Fitment note | Before ordering a John Deere Z335E belt, compare the old belt routing, pulley layout and deck size if available. A close-looking belt can still be wrong |
John Deere Z335E Belt Size FAQ
Is a close belt length good enough for the John Deere Z335E deck?
The deck belt length found is 95.5 in (2,426 mm). Close is not the same as correct. A belt that is slightly short can overload bearings, while one slightly long can slip or fail to engage the blades cleanly
Should you buy the John Deere Z335E belt by length only?
No. The drive belt width found is 0.5 in (13 mm). That is the common 1/2-inch belt width range. Still match the OEM number because the belt angle, fabric wrap and effective length can differ. Use length, width and OEM part number together where possible
How do you avoid mixing up the John Deere Z335E deck and drive belts?
Use the belt position first: deck belt part number M154958 and drive belt part number M154202. A deck belt number does not automatically fit the drive system, even when an aftermarket listing makes the cross-reference look close
What should you double-check with the John Deere Z335E deck belt part number?
The captured deck belt number is M154958. Because the width is missing here, check the old belt label, deck tag or parts diagram before trusting a non-OEM cross-reference
Mistakes do happen. Belt specs can change by year, mower deck, pulley layout, serial range and regional parts catalog. Please check the operator manual, belt routing decal, old belt label and official John Deere parts catalog before ordering a replacement belt.
