The drive belt part number found is MIA10045. The drive belt size found is 95.5 in (2,426 mm) long by 1.5 in (38 mm) wide.
John Deere S180 Belt Size and Part Numbers
| Drive belt part number | MIA10045 |
|---|---|
| Drive belt length | 95.5 in (2,426 mm) |
| Drive belt width | 1.5 in (38 mm) |
Belt Size Comparison Chart
Belt length comparison
Belt width comparison
John Deere S180 Belt Notes
| Drive belt note | The John Deere S180 drive or transmission belt listing shows part number MIA10045, length 95.5 in (2,426 mm) and width 1.5 in (38 mm). Treat it as partial drive-belt data if no matching width or OEM part number is shown |
|---|---|
| Fitment note | Belts are cheap until you buy the wrong one twice. On the John Deere S180, confirm belt route, old belt label and OEM part number before ordering |
John Deere S180 Belt Size FAQ
Why can the correct John Deere S180 drive belt still not pull properly?
The drive belt length found is 95.5 in (2,426 mm). If the tractor still slips, the belt may be routed wrong, the idler may be weak, or the pulley faces may be polished. Length alone does not fix a worn drive system
Why does 1.5 in (38 mm) belt width matter on the John Deere S180?
The captured drive belt width is 1.5 in (38 mm). Pulley grooves are cut for a matching belt profile. Wrong width can cause squeal, heat, poor blade speed or fast belt wear
Mistakes do happen. Belt specs can change by year, mower deck, pulley layout, serial range and regional parts catalog. Please check the operator manual, belt routing decal, old belt label and official John Deere parts catalog before ordering a replacement belt.
