The John Deere R92 mower blade part number found is M144196. The blade set part number found is M168223. The blade measurement captured is length 25 in (635 mm) and thickness 0.25 in (6 mm). The deck uses 1 blade.
John Deere R92 Mower Blade Size and Part Numbers
| Mower blade part number | M144196 |
|---|---|
| Mower blade set part number | M168223 |
| Blade length | 25 in (635 mm) |
| Blade thickness | 0.25 in (6 mm) |
| Number of blades | 1 blade |
| Blade type | high-lift, mulching, standard, and bagging |
Blade Size Comparison Chart
Blade length comparison
Blade thickness comparison
John Deere R92 Blade Notes
| Blade note | The John Deere R92 blade listing captured here shows single blade part number M144196, blade set part number M168223, and length 25 in (635 mm) and thickness 0.25 in (6 mm). Do not buy purely from model name if the mower deck or serial range is different |
|---|---|
| Deck note | For the John Deere R92, the captured deck information is blade count 1 blade. Deck size matters because the same model family can use different blade kits |
| Blade type note | For the John Deere R92, blade type is listed as high-lift, mulching, standard, and bagging. Pick the blade style for the job: clean discharge, bagging lift, or mulching |
| Fitment note | Blades are cheap until you buy the wrong set twice. On the John Deere R92, confirm part number, deck size and blade count before buying |
John Deere R92 Mower Blade FAQ
Is a close blade length good enough for the John Deere R92?
The blade length found is 25 in (635 mm). Close is not the same as correct. That is a longer mower blade, so wrong lift or wrong center hole can cause vibration, poor discharge or deck contact. Match the OEM number or old blade before buying
Should you buy one John Deere R92 blade or a full set?
The single blade number captured is M144196, and the set number captured is M168223. If one blade is bent from damage, one may be fine; if they are worn down, replacing the full set usually gives a cleaner cut
Can you swap John Deere R92 blade types?
The blade type captured is high-lift, mulching, standard, and bagging. You can often choose a different style only if it fits the same deck and spindle setup. Use 25 in (635 mm) as the fitment starting point
Mistakes do happen. Blade specs can change by year, mower deck, spindle, serial range and regional parts catalog. Please check the operator manual, old blade stamp, deck tag and official John Deere parts catalog before ordering replacement blades.
