John Deere LX173 Belt Size

Quick answer:

The deck belt size found is 66 in (1,676 mm) long by 0.5 in (13 mm) wide. The drive belt size found is 89 in (2,261 mm) long by 0.5 in (13 mm) wide.

Deck belt sizelength 66 in (1,676 mm) and width 0.5 in (13 mm)
Drive belt sizelength 89 in (2,261 mm) and width 0.5 in (13 mm)

John Deere LX173 Belt Size and Part Numbers

Mower deck belt length 66 in (1,676 mm)
Mower deck belt width 0.5 in (13 mm)
Drive belt length 89 in (2,261 mm)
Drive belt width 0.5 in (13 mm)

Belt Size Comparison Chart

Belt length comparison

This model

66 in

Average

75 in

Low

50 in

High

105 in

Belt width comparison

This model

0.5 in

Average

0.5 in

Low

0.38 in

High

0.75 in

John Deere LX173 Belt Notes

Mower deck belt note The John Deere LX173 deck belt measurement captured here is length 66 in (1,676 mm) and width 0.5 in (13 mm). Match the old belt, deck size and routing before spending money
Drive belt note The John Deere LX173 drive or transmission belt measurement captured here is length 89 in (2,261 mm) and width 0.5 in (13 mm). Do not mix it up with the deck belt because the routing and job are different
Fitment note For the John Deere LX173, use the listed specs as a buying guide, but confirm against the operator manual, parts diagram or belt label before spending money

John Deere LX173 Belt Size FAQ

Is a close belt length good enough for the John Deere LX173 deck?

The deck belt length found is 66 in (1,676 mm). Close is not the same as correct. A belt that is slightly short can overload bearings, while one slightly long can slip or fail to engage the blades cleanly

Why does 0.5 in (13 mm) belt width matter on the John Deere LX173?

The captured deck belt width is 0.5 in (13 mm). Pulley grooves are cut for a matching belt profile. Wrong width can cause squeal, heat, poor blade speed or fast belt wear

Are the John Deere LX173 deck and drive belt lengths close?

The deck belt is 66 in (1,676 mm) and the drive belt is 89 in (2,261 mm), about 23 in (584 mm) different. That is enough to treat them as separate belts when ordering

Official information note

Mistakes do happen. Belt specs can change by year, mower deck, pulley layout, serial range and regional parts catalog. Please check the operator manual, belt routing decal, old belt label and official John Deere parts catalog before ordering a replacement belt.