The John Deere E110 mower blade part number found is M144202. The blade set part number found is GY20850. The blade measurement captured is width 2.75 in (70 mm) and thickness 0.25 in (6 mm). The deck uses 2 blades.
John Deere E110 Mower Blade Size and Part Numbers
| Mower blade part number | M144202 |
|---|---|
| Mower blade set part number | GY20850 |
| Blade width | 2.75 in (70 mm) |
| Blade thickness | 0.25 in (6 mm) |
| Number of blades | 2 blades |
Blade Size Comparison Chart
Blade width comparison
Blade thickness comparison
John Deere E110 Blade Notes
| Blade note | The John Deere E110 blade listing captured here shows single blade part number M144202, blade set part number GY20850, and width 2.75 in (70 mm) and thickness 0.25 in (6 mm). Confirm the number against the deck tag, old blade stamp or official parts diagram before ordering |
|---|---|
| Deck note | For the John Deere E110, the captured deck information is blade count 2 blades. This helps separate 42-inch, 48-inch, 54-inch and larger deck blade setups |
| Fitment note | Before ordering John Deere E110 blades, compare the old blade stamp, center-hole shape, blade length and deck size. Close-looking blades can still be wrong |
John Deere E110 Mower Blade FAQ
Does 2.75 in (70 mm) blade width matter on the John Deere E110?
Yes. The blade width captured is 2.75 in (70 mm). That is a normal mower blade width range. Width affects airflow, lift and clipping movement under the deck. A different width can change airflow, cut quality and clipping discharge
Should you buy one John Deere E110 blade or a full set?
The single blade number captured is M144202, and the set number captured is GY20850. If one blade is bent from damage, one may be fine; if they are worn down, replacing the full set usually gives a cleaner cut
Mistakes do happen. Blade specs can change by year, mower deck, spindle, serial range and regional parts catalog. Please check the operator manual, old blade stamp, deck tag and official John Deere parts catalog before ordering replacement blades.
