The John Deere 60 mower blade part number found is M141785. The blade set part number found is TCU21475. The blade measurement captured is width 3 in (76 mm). The deck uses 1 blade.
Blade part #M141785
Blade set part #TCU21475
Blade sizewidth 3 in (76 mm)
Blade count1 blade
John Deere 60 Mower Blade Size and Part Numbers
Mower blade part number
M141785
Mower blade set part number
TCU21475
Blade width
3 in (76 mm)
Number of blades
1 blade
Blade Size Comparison Chart
Blade width comparison
This model
3 in
Average
2.5 in
Low
2 in
High
3.5 in
John Deere 60 Blade Notes
Blade note
The John Deere 60 blade listing captured here shows single blade part number M141785, blade set part number TCU21475, and width 3 in (76 mm). Do not buy purely from model name if the mower deck or serial range is different
Deck note
For the John Deere 60, the captured deck information is blade count 1 blade. Deck size matters because the same model family can use different blade kits
Fitment note
The blunt rule with the John Deere 60: part number and center hole beat guesswork. A blade can be the right length and still be wrong
John Deere 60 Mower Blade FAQ
Does 3 in (76 mm) blade width matter on the John Deere 60?
Yes. The blade width captured is 3 in (76 mm). That is a normal mower blade width range. Width affects airflow, lift and clipping movement under the deck. A different width can change airflow, cut quality and clipping discharge
Should you buy one John Deere 60 blade or a full set?
The single blade number captured is M141785, and the set number captured is TCU21475. If one blade is bent from damage, one may be fine; if they are worn down, replacing the full set usually gives a cleaner cut
Official information note
Mistakes do happen. Blade specs can change by year, mower deck, spindle, serial range and regional parts catalog. Please check the operator manual, old blade stamp, deck tag and official John Deere parts catalog before ordering replacement blades.
