Weight summary
The published John Deere 420 weight is 3,250 lb (1,474 kg). The primary figure used for comparisons is 3,250 lb (1,474 kg), listed as Weight.
How this weight compares
Utility Tractor peers ยท 1,294 tractors in the benchmark.
Average
Low and high use the 10th and 90th percentiles of the peer group, which keeps one unusually light or heavy tractor from distorting the scale. Average is the peer-group mean.
Tractor profile
Model information
| Manufacturer | John Deere |
|---|---|
| Model | 420 |
| Category | Farm tractor |
| Model years | 1956 – 1958 |
| Tractor type | Utility Tractor |
| Published weight variants | 1 |
Weight variants
Shipping, operating, ballasted and drivetrain/configuration weights are kept separate when the source publishes them separately.
| Weight type | Configuration | Weight | Metric | US tons | Variant / note |
|---|---|---|---|---|---|
| Weight | โ | 3,250 lb | 1,474 kg | 1.62 | โ |
Technical details
Dimensions
Power & weight ratios
Transport snapshot
Weight context
Tractors with similar weight
Useful reference points from the same dataset.
Closest by published weight
- John Deere 430 (3250 lb)
- Case IH Farmall 40 (3252 lb)
- Massey Ferguson 835 (3263 lb)
- John Deere B (3275 lb)
- Kubota L4701 (3219 lb)
Closest comparable tractors
- John Deere 430 (3250 lb, 26.15 hp)
- Case IH Farmall 35A Series II (3067 lb)
- Case IH Farmall 40A Series II (3067 lb)
- Case IH Farmall 30B (3121 lb, 28 hp)
- John Deere 3120 (3000 lb)
John Deere 420 weight FAQ
How much does a John Deere 420 weigh?
The John Deere 420 weighs 3,250 lb (1,474 kg) using the primary published weight figure.
Is the John Deere 420 heavy or light for a utility tractor?
It is close to average for its peer group. The representative figure sits at about the 35th percentile, near the middle of the utility tractor peers. That puts it in the average range for this comparison. It is 2,013 lb lighter than the peer-group average of 5,263 lb.
How wide is the John Deere 420 for transport?
The maximum published tractor width is 55.5 in (4.6 ft). That is 46.5 in under 8.5 ft before allowing for a loader, duals, implements or other equipment that may increase transport width.
What is the John Deere 420 weight-to-horsepower ratio?
Using the pageโs representative 3,250 lb weight and 26.1 hp power figure, the tractor carries about 124.3 lb per horsepower. A lower lb/hp number means less tractor mass for each horsepower; this is a comparison metric, not a traction or performance rating.
How many tons does the John Deere 420 weigh?
The representative published weight is about 1.62 US tons, while the full published range is 1.62 US tons. Loaded transport weight can be higher than the tractor specification.

