The Case IH Farmall DX29 tractor weighs 2,474 lb (1,122 kg) using its published Weight hydro weight. Other useful published figures are 2,440 lb (Weight — gear). That places it around the 23rd percentile among comparable utility tractors, lighter than about 77% of its peers.
The published Case IH Farmall DX29 weight is 2,440–2,474 lb (1,106–1,122 kg). The primary figure used for comparisons is 2,474 lb (1,122 kg), listed as Weight — hydro. The published configurations span 34 lb, a 1.4% difference from the lightest listed setup.
Tractor-weight benchmark
How this weight compares
Utility Tractor peers · 1,294 tractors in the benchmark.
Representative published weight
Light
2,474 lb
Low1,537 lb
This model2,474 lb
Average5,263 lb
High9,595 lb
Low and high use the 10th and 90th percentiles of the peer group, which keeps one unusually light or heavy tractor from distorting the scale. Average is the peer-group mean.
At a glance
Tractor profile
Published weight2,440–2,474 lb (1,106–1,122 kg)
Overall weight bandLight
Tractor typeUtility Tractor
Primary horsepower29 hp / 21.6 kW
Weight per hp85.3 lb/hp
Published variants2
Overview
Model information
Manufacturer
Case IH
Model
Farmall DX29
Category
Farm tractor
Model years
2003 – 2005
Tractor type
Utility Tractor
Published weight variants
2
Published configurations
Weight variants
Shipping, operating, ballasted and drivetrain/configuration weights are kept separate when the source publishes them separately.
Weight type
Configuration
Weight
Metric
US tons
Variant / note
Weight
hydro
2,474 lb
1,122 kg
1.24
—
Weight
gear
2,440 lb
1,106 kg
1.22
—
Configuration effect
How configuration changes the weight
34 lbLightest to heaviest · 1.4% spread across published variants
Dimensions, power & hauling
Technical details
Dimensions
Wheelbase63 in (160 cm)
Power & weight ratios
Primary power29 hp (21.6 kW)
Power basisEngine (gross)
Weight per horsepower85.3 lb/hp
Transport snapshot
Primary published weight2,474 lb (1,122 kg)
Maximum published weight2,474 lb (1,122 kg)
Maximum US-ton equivalent1.24 US tons
Weight context
Weight range2,440–2,474 lb (1,106–1,122 kg)
Primary weight basisWeight — hydro
Peer positionLight among Utility Tractor peers · 24th percentile
Physical size classNot enough dimension data
For transport planning, the representative published tractor weight is about 2,474 lb (1.24 US tons); published configurations reach 2,474 lb (1.24 US tons). Actual transport weight and dimensions can increase with fuel, ballast, a loader, implements, tires and other installed equipment.
Nearby benchmarks
Tractors with similar weight
Useful reference points from the same dataset.
Closest by published weight
New Holland TC29 (2474 lb)
New Holland TC29DA (2474 lb)
New Holland TC31DA (2474 lb)
New Holland TC33DA (2474 lb)
Case IH Farmall 25A (2469 lb)
Closest comparable tractors
New Holland TC29 (2474 lb, 29 hp)
New Holland TC29DA (2474 lb, 29 hp)
Kubota L2950 (2445 lb)
Ford 1710 (2425 lb)
Kubota L2501 (2425 lb)
Common questions
Case IH Farmall DX29 weight FAQ
How much does a Case IH Farmall DX29 weigh?
The Case IH Farmall DX29 weighs 2,474 lb (1,122 kg) using the published Weight — hydro figure. Across the published configurations on this page, weight ranges from 2,440 to 2,474 lb (1,106 to 1,122 kg).
How much does the hydrostatic Case IH Farmall DX29 weigh compared with the gear-drive version?
The published hydrostatic weight is 2,474 lb (1,122 kg), while gear-drive configurations are 2,440 lb (1,107 kg). The exact difference depends on drivetrain as well as transmission, so the configuration table above is the safest like-for-like reference.
Is the Case IH Farmall DX29 a lightweight utility tractor?
Yes. The representative figure sits at about the 24th percentile, lighter than roughly 76% of the utility tractor peers. That puts it in the light range for this comparison. It is 2,789 lb lighter than the peer-group average of 5,263 lb.
What is the Case IH Farmall DX29 weight-to-horsepower ratio?
Using the page’s representative 2,474 lb weight and 29 hp power figure, the tractor carries about 85.3 lb per horsepower. A lower lb/hp number means less tractor mass for each horsepower; this is a comparison metric, not a traction or performance rating.
How many tons does the Case IH Farmall DX29 weigh?
The representative published weight is about 1.24 US tons, while the full published range is 1.22–1.24 US tons. Loaded transport weight can be higher than the tractor specification.
