Quick answer:
The John Deere 4020 battery size is listed as Group 31, 6 V, 13 × 6.81 × 9.44 in.
Battery sizeGroup 31
Voltage6 V
Case size13 × 6.81 × 9.44 in
John Deere 4020 Battery Specs
| Battery size / group | Group 31 |
|---|---|
| Battery voltage | 6 V |
| Battery dimensions | 13 × 6.81 × 9.44 in |
Battery Spec Comparisons Chart
Voltage comparison
Case length comparison
John Deere 4020 Battery FAQ
| Replacement battery recommendation | A Group 31 or larger battery is recommended for a John Deere 4020 tractor, with properly built battery boxes and beefy new cables for best performance |
|---|---|
| Battery voltage | The original John Deere 4020 came from the factory with two 6-volt batteries wired in series for a 12-volt system |
| Battery group size | The official battery group size for the John Deere 4020 tractor is Group 31. This size is suitable for converting to a single 12V battery setup |
| Battery CCA | The recommended official John Deere 4020 tractor battery has a Cold Cranking Amps (CCA) rating of 900. This ensures reliable starting performance, especially in cold conditions |
| Battery location | The battery on the John Deere 4020 tractor is typically located underneath the right access step. You may need to open the flap and possibly remove the access step to access the battery |
| Battery replacement steps | To replace the battery on a John Deere 4020 tractor, disconnect and remove the old batteries, then install the new 12-volt batteries in parallel, ensuring they are properly secured in the battery boxes. Make sure to connect the positive and negative leads correctly to the corresponding terminals. Sciencing |
Official information note
Mistakes do happen. Please check official deere.com website for official information.







