The John Deere 3045R tractor hydraulic pump flow is 12.5 GPM, and hydraulic system pressure is 2,321 psi.
Hydraulic pump flow12.5 GPM
Implement flow13.9 GPM
Total hydraulic flow13.9 GPM
Hydraulic pressure2,321 psi
Hydraulic system typeclosed-center
John Deere 3045R Hydraulic Flow Details
Hydraulic pump flow
12.5 GPM
Implement hydraulic flow
13.9 GPM
Total hydraulic flow
13.9 GPM
Hydraulic system pressure
2,321 psi
Hydraulic system type
closed-center
Hydraulic Flow Comparison Chart
Hydraulic pump flow comparison
This model
12.5 GPM
Average
15.7 GPM
Low
5.1 GPM
High
57 GPM
Implement hydraulic flow comparison
This model
13.9 GPM
Average
14.9 GPM
Low
4.8 GPM
High
32 GPM
Total hydraulic flow comparison
This model
13.9 GPM
Average
15.4 GPM
Low
4.8 GPM
High
57 GPM
Hydraulic pressure comparison
This model
2,321 psi
Average
2,336.3 psi
Low
380 psi
High
3,625 psi
John Deere 3045R Extra Hydraulic Notes
Hydraulic flow note
The John Deere 3045R’s implement flow figure is about 13.9 GPM, so hydraulic attachment choice should be based on flow demand, not horsepower alone.
Hydraulic pressure note
Hydraulic pressure on the John Deere 3045R is 2,321 psi, but hydraulic performance depends on pressure and flow together.
Rear remotes / SCV note
Rear remotes / SCVs depend on the tractor’s hydraulic package and options.
For hydraulic implements, match the implement to the available hydraulic flow (13.9 GPM), not just the number of remotes.
Check the operator manual or hydraulic package because SCV count can change by year, market and trim package.
Hydraulic system type note
The John Deere 3045R uses a closed-center hydraulic setup, so compatibility depends on both the attachment and valve configuration.
Official information note
Mistakes do happen. Hydraulic flow, pump flow, implement flow, pressure, rear remote / SCV setup and fluid capacity can change by year, market, transmission, pump option, loader package and hydraulic package. Please check the operator manual and official deere.com website for official information.
