The John Deere 3025E takes 4.5 quarts / 4.3 litres of engine oil with filter.
John Deere 3025E Oil Capacity and Type
Engine Oil Capacity
4.5 qt / 4.3 L with filter
Recommended Oil Name
John Deere Plus-50 II Premium
Recommended Oil Type
SAE 10W-30 diesel engine oil
Engine
Yanmar 3TNV88F-EPJT2 diesel engine
Engine Power
24.4 HP gross
PTO Power
17.4 HP
Cylinders
3-cylinder diesel
Displacement
1.64 L / 100.2 cu in
Cooling System
Liquid-cooled
Oil Filter
John Deere M806419
Oil Change Interval
Every 400 hours or annually, whichever comes first
How Much Oil Does a John Deere 3025E Take?
The John Deere 3025E takes 4.5 quarts / 4.3 litres of engine oil when changing the oil and filter.
Use John Deere Plus-50 II Premium 10W-30 or another quality diesel-rated SAE 10W-30 engine oil suitable for compact tractor diesel engines.
Fill close to 4.3 litres, run the engine briefly, shut it off, wait a few minutes, then check the dipstick. Top up slowly if needed. Do not overfill it.
Quick Specs Overview
4.5 qtEngine Oil
10W-30Oil Type
400 hrsOil Interval
24.4 HPGross Power
Best Oil to Use
John Deere Plus-50 II Premium 10W-30
SAE 10W-30 diesel engine oil
Diesel-rated engine oil suitable for compact utility tractors
Replace the engine oil filter at every oil change
Use John Deere oil filter M806419 or a correct equivalent
Oil Capacity Comparison
3025E
4.5 qt
3032E
4.5 qt
3038E
4.5 qt
1025R
3.2 qt
Oil Change Intervals
Engine Oil
Every 400 hours or annually, whichever comes first
Engine Oil Filter
Every 400 hours or annually, whichever comes first
Primary Fuel Filter
Every 400 hours or annually, whichever comes first
Fuel-Water Separator
Every 400 hours
Air Filter
Check or replace every 600 hours, or as required
Hydraulic Filters
Every 400 hours
Front Axle Oil
Every 600 hours
Other John Deere 3025E Fluid Capacities
Engine Oil
4.5 qt / 4.3 L with filter
Fuel Tank
7.5 gal / 28.5 L
Cooling System
1.3 gal / 4.9 L
Transmission / Hydraulic System
5.5 gal / 20.8 L
Front Axle Oil
1.0 gal / 3.8 L
Recommended Hydraulic Oil
John Deere Hy-Gard or Low-Viscosity Hy-Gard
John Deere 3025E Engine Specs
Engine
Yanmar 3TNV88F-EPJT2 diesel
Displacement
1.64 L / 100.2 cu in
Cylinders
3-cylinder
Fuel Type
Diesel
Aspiration
Naturally aspirated
Cooling System
Liquid-cooled
Rated Speed
2400 rpm
Gross Engine Power
24.4 HP
PTO Power
17.4 HP
Lubrication
Pressurized lubrication with replaceable oil filter
Common Mistakes
Using 4.7 quarts instead of the correct 4.5 quart / 4.3 litre capacity
Using gasoline-engine oil instead of diesel-rated engine oil
Forgetting that the oil capacity includes the filter
Confusing engine oil with Hy-Gard transmission/hydraulic oil
Skipping the annual oil change on low-hour tractors
Using the wrong oil filter instead of M806419 or a correct equivalent
Summary
The John Deere 3025E takes 4.5 quarts / 4.3 litres of engine oil with filter. The recommended oil is John Deere Plus-50 II Premium 10W-30 or another quality diesel-rated SAE 10W-30 engine oil. The 3025E uses a Yanmar 3-cylinder liquid-cooled diesel engine with 24.4 gross horsepower and 17.4 PTO horsepower. Change the engine oil and filter every 400 hours or annually, whichever comes first.
