The John Deere 2951 tractor hydraulic pump flow is 21 GPM, and hydraulic system pressure is 2,250 psi.
Hydraulic pump flow21 GPM
Implement flow21 GPM
Total hydraulic flow21 GPM
Hydraulic pressure2,250 psi
Hydraulic system typeopen-center
Hydraulic fluid capacity8.5 L (2.2 gal)
John Deere 2951 Hydraulic Flow Details
Hydraulic pump flow
21 GPM
Implement hydraulic flow
21 GPM
Total hydraulic flow
21 GPM
Hydraulic system pressure
2,250 psi
Hydraulic system type
open-center
Hydraulic fluid capacity
8.5 L (2.2 gal)
Hydraulic Flow Comparison Chart
Hydraulic pump flow comparison
This model
21 GPM
Average
15.7 GPM
Low
5.1 GPM
High
57 GPM
Implement hydraulic flow comparison
This model
21 GPM
Average
14.9 GPM
Low
4.8 GPM
High
32 GPM
Total hydraulic flow comparison
This model
21 GPM
Average
15.4 GPM
Low
4.8 GPM
High
57 GPM
Hydraulic pressure comparison
This model
2,250 psi
Average
2,336.3 psi
Low
380 psi
High
3,625 psi
Hydraulic fluid capacity comparison
This model
2.2 gal
Average
9.9 gal
Low
0.7 gal
High
25.4 gal
John Deere 2951 Extra Hydraulic Notes
Hydraulic flow note
The John Deere 2951’s implement flow figure is about 21 GPM, so hydraulic attachment choice should be based on flow demand, not horsepower alone.
Hydraulic pressure note
The John Deere 2951’s hydraulic pressure is listed at 2,250 psi, which is normal utility-tractor pressure; flow still decides attachment speed while pressure affects force.
Rear remotes / SCV note
Rear remotes / SCVs depend on the tractor’s hydraulic package and options.
For hydraulic implements, match the implement to the available hydraulic flow (21 GPM), not just the number of remotes.
Check the operator manual or hydraulic package because SCV count can change by year, market and trim package.
Hydraulic system type note
System type matters on the John Deere 2951: open-center affects how hydraulic flow and pressure are delivered to valves and implements.
Hydraulic fluid capacity note
The John Deere 2951’s hydraulic fluid capacity is listed as 8.5 L (2.2 gal); check the operator manual before servicing because capacity can change with transmission, hydraulic options and market.
Official information note
Mistakes do happen. Hydraulic flow, pump flow, implement flow, pressure, rear remote / SCV setup and fluid capacity can change by year, market, transmission, pump option, loader package and hydraulic package. Please check the operator manual and official deere.com website for official information.
