The John Deere 2730 tractor hydraulic pump flow is 31.7 GPM, and hydraulic system pressure is 2,250 psi.
Hydraulic pump flow31.7 GPM
Implement flow10.5 GPM
Total hydraulic flow10.5 GPM
Hydraulic pressure2,250 psi
Hydraulic system typeclosed-center
Hydraulic fluid capacity25.1 gal
John Deere 2730 Hydraulic Flow Details
Hydraulic pump flow
31.7 GPM
Implement hydraulic flow
10.5 GPM
Total hydraulic flow
10.5 GPM
Hydraulic system pressure
2,250 psi
Hydraulic system type
closed-center
Hydraulic fluid capacity
25.1 gal
Hydraulic Flow Comparison Chart
Hydraulic pump flow comparison
This model
31.7 GPM
Average
15.7 GPM
Low
5.1 GPM
High
57 GPM
Implement hydraulic flow comparison
This model
10.5 GPM
Average
14.9 GPM
Low
4.8 GPM
High
32 GPM
Total hydraulic flow comparison
This model
10.5 GPM
Average
15.4 GPM
Low
4.8 GPM
High
57 GPM
Hydraulic pressure comparison
This model
2,250 psi
Average
2,336.3 psi
Low
380 psi
High
3,625 psi
Hydraulic fluid capacity comparison
This model
25.1 gal
Average
9.9 gal
Low
0.7 gal
High
25.4 gal
John Deere 2730 Extra Hydraulic Notes
Hydraulic flow note
With about 10.5 GPM implement flow, the John Deere 2730 sits in the compact / utility hydraulic range and is best suited to normal loader use, small hydraulic implements and general utility work.
Hydraulic pressure note
The John Deere 2730’s hydraulic pressure is listed at 2,250 psi, which is normal utility-tractor pressure; flow still decides attachment speed while pressure affects force.
Rear remotes / SCV note
Rear remotes / SCVs depend on the tractor’s hydraulic package and options.
For hydraulic implements, match the implement to the available hydraulic flow (10.5 GPM), not just the number of remotes.
Check the operator manual or hydraulic package because SCV count can change by year, market and trim package.
Hydraulic system type note
The John Deere 2730’s hydraulic system type is closed-center, which is built for higher-pressure hydraulic control than a basic open-center setup.
Hydraulic fluid capacity note
For maintenance, the John Deere 2730’s hydraulic fluid capacity matters more than flow rate because it affects oil changes, filter service and refill quantity.
Official information note
Mistakes do happen. Hydraulic flow, pump flow, implement flow, pressure, rear remote / SCV setup and fluid capacity can change by year, market, transmission, pump option, loader package and hydraulic package. Please check the operator manual and official deere.com website for official information.
