The John Deere 2535 tractor hydraulic pump flow is 14 GPM, and hydraulic system pressure is 2,250 psi.
Hydraulic pump flow14 GPM
Implement flow12.4 GPM
Total hydraulic flow21 GPM
Hydraulic pressure2,250 psi
Hydraulic system typeclosed-center pressure-flow compensated
Hydraulic fluid capacity15.5 qt (3.9 gal)
John Deere 2535 Hydraulic Flow Details
Hydraulic pump flow
14 GPM
Implement hydraulic flow
12.4 GPM
Total hydraulic flow
21 GPM
Hydraulic system pressure
2,250 psi
Hydraulic system type
closed-center pressure-flow compensated
Hydraulic fluid capacity
15.5 qt (3.9 gal)
Hydraulic Flow Comparison Chart
Hydraulic pump flow comparison
This model
14 GPM
Average
15.7 GPM
Low
5.1 GPM
High
57 GPM
Implement hydraulic flow comparison
This model
12.4 GPM
Average
14.9 GPM
Low
4.8 GPM
High
32 GPM
Total hydraulic flow comparison
This model
21 GPM
Average
15.4 GPM
Low
4.8 GPM
High
57 GPM
Hydraulic pressure comparison
This model
2,250 psi
Average
2,336.3 psi
Low
380 psi
High
3,625 psi
Hydraulic fluid capacity comparison
This model
3.9 gal
Average
9.9 gal
Low
0.7 gal
High
25.4 gal
John Deere 2535 Extra Hydraulic Notes
Hydraulic flow note
The John Deere 2535 separates implement flow from total hydraulic flow: 12.4 GPM is the more useful number for rear remotes and hydraulic implements, while 21 GPM includes the wider system total.
Hydraulic pressure note
At 2,250 psi, the John Deere 2535’s hydraulic system pressure matters most for lift force, cylinder force and loader response.
Rear remotes / SCV note
Rear remotes / SCVs depend on the tractor’s hydraulic package and options.
For hydraulic implements, match the implement to the available hydraulic flow (12.4 GPM), not just the number of remotes.
Check the operator manual or hydraulic package because SCV count can change by year, market and trim package.
Hydraulic system type note
The John Deere 2535’s hydraulic system type is closed-center pressure-flow compensated, which is more advanced and better suited to variable hydraulic demand.
Hydraulic fluid capacity note
Hydraulic fluid capacity on the John Deere 2535 is 15.5 qt (3.9 gal), but the correct oil type and fill/check procedure should still come from the official manual.
Official information note
Mistakes do happen. Hydraulic flow, pump flow, implement flow, pressure, rear remote / SCV setup and fluid capacity can change by year, market, transmission, pump option, loader package and hydraulic package. Please check the operator manual and official deere.com website for official information.
