The John Deere 2350 tractor hydraulic pump flow is 11.6 GPM, and hydraulic system pressure is 2,750 psi.
Hydraulic pump flow11.6 GPM
Implement flow13 GPM
Total hydraulic flow13 GPM
Hydraulic pressure2,750 psi
Hydraulic system typeclosed-center
Hydraulic fluid capacity47.6 qt (11.9 gal)
John Deere 2350 Hydraulic Flow Details
Hydraulic pump flow
11.6 GPM
Implement hydraulic flow
13 GPM
Total hydraulic flow
13 GPM
Hydraulic system pressure
2,750 psi
Hydraulic system type
closed-center
Hydraulic fluid capacity
47.6 qt (11.9 gal)
Hydraulic Flow Comparison Chart
Hydraulic pump flow comparison
This model
11.6 GPM
Average
15.7 GPM
Low
5.1 GPM
High
57 GPM
Implement hydraulic flow comparison
This model
13 GPM
Average
14.9 GPM
Low
4.8 GPM
High
32 GPM
Total hydraulic flow comparison
This model
13 GPM
Average
15.4 GPM
Low
4.8 GPM
High
57 GPM
Hydraulic pressure comparison
This model
2,750 psi
Average
2,336.3 psi
Low
380 psi
High
3,625 psi
Hydraulic fluid capacity comparison
This model
11.9 gal
Average
9.9 gal
Low
0.7 gal
High
25.4 gal
John Deere 2350 Extra Hydraulic Notes
Hydraulic flow note
For hydraulic work, the key number on the John Deere 2350 is 13 GPM implement flow; that points toward normal loader use, small hydraulic implements and general utility work.
Hydraulic pressure note
At 2,750 psi, the John Deere 2350’s hydraulic system pressure matters most for lift force, cylinder force and loader response.
Rear remotes / SCV note
Rear remotes / SCVs depend on the tractor’s hydraulic package and options.
For hydraulic implements, match the implement to the available hydraulic flow (13 GPM), not just the number of remotes.
Check the operator manual or hydraulic package because SCV count can change by year, market and trim package.
Hydraulic system type note
The John Deere 2350’s hydraulic system type is closed-center, which is built for higher-pressure hydraulic control than a basic open-center setup.
Hydraulic fluid capacity note
For maintenance, the John Deere 2350’s hydraulic fluid capacity matters more than flow rate because it affects oil changes, filter service and refill quantity.
Official information note
Mistakes do happen. Hydraulic flow, pump flow, implement flow, pressure, rear remote / SCV setup and fluid capacity can change by year, market, transmission, pump option, loader package and hydraulic package. Please check the operator manual and official deere.com website for official information.
