The John Deere 180 deck belt part numbers found are M152630, M150718, and M141562. The drive belt part number found is M144044. The drive belt size found is 87 in (2,210 mm) long by 0.5 in (13 mm) wide.
John Deere 180 Belt Size and Part Numbers
| Mower deck belt part number | M152630, M150718, and M141562 |
|---|---|
| Drive belt part number | M144044 |
| Drive belt length | 87 in (2,210 mm) |
| Drive belt width | 0.5 in (13 mm) |
Belt Size Comparison Chart
Belt length comparison
Belt width comparison
John Deere 180 Belt Notes
| Mower deck belt note | The John Deere 180 deck belt part numbers captured here are M152630, M150718, and M141562. Use the listed value as a buying guide, not a blind substitute for the deck-specific parts diagram |
|---|---|
| Drive belt note | The John Deere 180 drive or transmission belt listing shows part number M144044, length 87 in (2,210 mm) and width 0.5 in (13 mm). This is separate from the mower deck belt |
| Fitment note | The blunt rule with the John Deere 180: part number beats guesswork. If the belt is off by even a small amount, it can slip, squeal, jump pulleys or wear fast |
John Deere 180 Belt Size FAQ
Why can the correct John Deere 180 drive belt still not pull properly?
The drive belt length found is 87 in (2,210 mm). If the tractor still slips, the belt may be routed wrong, the idler may be weak, or the pulley faces may be polished. Length alone does not fix a worn drive system
Can you replace the John Deere 180 belt with the same length but different width?
The drive belt width found is 0.5 in (13 mm). That is the common 1/2-inch belt width range. Still match the OEM number because the belt angle, fabric wrap and effective length can differ. A belt with the wrong top width can ride too high or too low in the pulley even if the length looks right
Why are there multiple belt part numbers for the John Deere 180?
The captured values separate the belt jobs: deck belt part numbers M152630, M150718, and M141562 and drive belt part number M144044. Treat each number as position-specific and confirm it against the parts diagram before ordering
Are the captured John Deere 180 deck belt part numbers enough to buy from?
The captured deck belt numbers are M152630, M150718, and M141562. These numbers help with OEM lookup, but the deck belt length and width were not fully captured here. Before buying aftermarket, confirm the exact deck or serial range
Mistakes do happen. Belt specs can change by year, mower deck, pulley layout, serial range and regional parts catalog. Please check the operator manual, belt routing decal, old belt label and official John Deere parts catalog before ordering a replacement belt.
