John Deere 112 Belt Size

Quick answer:

The John Deere 112 deck belt part number found is M802202. The deck belt size found is 87 in (2,210 mm) long by 0.5 in (13 mm) wide. The drive belt part number found is M802202. The drive belt size found is 87 in (2,210 mm) long by 0.5 in (13 mm) wide.

Deck belt part #M802202
Deck belt sizelength 87 in (2,210 mm) and width 0.5 in (13 mm)
Drive belt part #M802202
Drive belt sizelength 87 in (2,210 mm) and width 0.5 in (13 mm)

John Deere 112 Belt Size and Part Numbers

Mower deck belt part number M802202
Mower deck belt length 87 in (2,210 mm)
Mower deck belt width 0.5 in (13 mm)
Drive belt part number M802202
Drive belt length 87 in (2,210 mm)
Drive belt width 0.5 in (13 mm)

Belt Size Comparison Chart

Belt length comparison

This model

87 in

Average

75 in

Low

50 in

High

105 in

Belt width comparison

This model

0.5 in

Average

0.5 in

Low

0.38 in

High

0.75 in

John Deere 112 Belt Notes

Mower deck belt note The John Deere 112 deck belt listing shows part number M802202, length 87 in (2,210 mm) and width 0.5 in (13 mm). Match the old belt, deck size and routing before spending money
Drive belt note The John Deere 112 drive or transmission belt listing shows part number M802202, length 87 in (2,210 mm) and width 0.5 in (13 mm). Do not mix it up with the deck belt because the routing and job are different
Fitment note Belts are cheap until you buy the wrong one twice. On the John Deere 112, confirm belt route, old belt label and OEM part number before ordering

John Deere 112 Belt Size FAQ

Is a close belt length good enough for the John Deere 112 deck?

The deck belt length found is 87 in (2,210 mm). Close is not the same as correct. A belt that is slightly short can overload bearings, while one slightly long can slip or fail to engage the blades cleanly

Why does 0.5 in (13 mm) belt width matter on the John Deere 112?

The captured deck belt width is 0.5 in (13 mm). Pulley grooves are cut for a matching belt profile. Wrong width can cause squeal, heat, poor blade speed or fast belt wear

Official information note

Mistakes do happen. Belt specs can change by year, mower deck, pulley layout, serial range and regional parts catalog. Please check the operator manual, belt routing decal, old belt label and official John Deere parts catalog before ordering a replacement belt.