The J.I. Case 700 tractor weighs 7,600 lb (3,447 kg) using its primary published weight. That places it around the 37th percentile among tractors in the dataset, on the lighter side of its peer group. With 51 hp, the tractor carries about 149 lb of published weight per horsepower.
The published J.I. Case 700 weight is 7,600 lb (3,447 kg). The primary figure used for comparisons is 7,600 lb (3,447 kg), listed as Weight.
Tractor-weight benchmark
How this weight compares
All tractors in this dataset · 2,282 tractors in the benchmark.
Representative published weight
Average
7,600 lb
Low1,984 lb
This model7,600 lb
Average9,927 lb
High21,767 lb
Low and high use the 10th and 90th percentiles of the peer group, which keeps one unusually light or heavy tractor from distorting the scale. Average is the peer-group mean.
At a glance
Tractor profile
Published weight7,600 lb (3,447 kg)
Overall weight bandHeavy
Tractor typeFarm tractor
Primary horsepower51 hp / 38 kW
Weight per hp149 lb/hp
Published variants1
Overview
Model information
Manufacturer
J.I. Case
Model
700
Category
Farm tractor
Model years
1958 – 1960
Tractor type
Farm tractor
Published weight variants
1
Published configurations
Weight variants
Shipping, operating, ballasted and drivetrain/configuration weights are kept separate when the source publishes them separately.
Weight type
Configuration
Weight
Metric
US tons
Variant / note
Weight
—
7,600 lb
3,447 kg
3.8
—
Dimensions, power & hauling
Technical details
Dimensions
DimensionsNot published
Power & weight ratios
Primary power51 hp (38 kW)
Power basisPTO (claimed)
Weight per horsepower149 lb/hp
Transport snapshot
Primary published weight7,600 lb (3,447 kg)
Maximum published weight7,600 lb (3,447 kg)
Maximum US-ton equivalent3.8 US tons
Weight context
Weight range7,600 lb (3,447 kg)
Primary weight basisWeight
Peer positionAverage among All tractors in this dataset · 58th percentile
Physical size classNot enough dimension data
For transport planning, the representative published tractor weight is about 7,600 lb (3.8 US tons); published configurations reach 7,600 lb (3.8 US tons). Actual transport weight and dimensions can increase with fuel, ballast, a loader, implements, tires and other installed equipment.
Nearby benchmarks
Tractors with similar weight
Useful reference points from the same dataset.
Closest by published weight
John Deere R (7603 lb)
Case IH C60 (7605 lb)
Case IH C50 (7595 lb)
John Deere 6400 (7607 lb)
New Holland TS6020 (7617 lb)
Closest comparable tractors
J.I. Case 610 (7625 lb)
Case IH C50 (7595 lb, 53 hp)
John Deere 1641 (7409 lb)
Case IH CX50 (7286 lb, 53 hp)
Farmall 544 (7195 lb, 52 hp)
Common questions
J.I. Case 700 weight FAQ
How much does a J.I. Case 700 weigh?
The J.I. Case 700 weighs 7,600 lb (3,447 kg) using the primary published weight figure.
Is the J.I. Case 700 heavy or light for a farm tractor?
It is close to average for its peer group. The representative figure sits at about the 58th percentile, near the middle of the all tractors in this dataset. That puts it in the average range for this comparison. It is 2,327 lb lighter than the peer-group average of 9,927 lb.
What is the J.I. Case 700 weight-to-horsepower ratio?
Using the page’s representative 7,600 lb weight and 51 hp power figure, the tractor carries about 149 lb per horsepower. A lower lb/hp number means less tractor mass for each horsepower; this is a comparison metric, not a traction or performance rating.
How many tons does the J.I. Case 700 weigh?
The representative published weight is about 3.8 US tons, while the full published range is 3.8 US tons. Loaded transport weight can be higher than the tractor specification.
