Gehl SL 5640 DXT Battery Size (Group 31)

The Gehl SL 5640 DXT skid-steer battery size is Group 31, and it uses a 12-volt electrical system. Its 800 CCA rating is average for Gehl skid-steers in this dataset.

ModelSL 5640 DXT
BrandGehl
Voltage12 V
EquipmentSkid Steer

Voltage
12 V
Cold cranking
800 CCA
Battery size
Group 31
Battery location
See details below

How this battery compares

Compared with other Gehl skid-steer battery ratings in this dataset.

Cold cranking amps800 CCA
Average
LowAverageHigh
Low 105 CCAMedian 800 CCAHigh 950 CCA

BA

Battery specification

Model-specific replacement data

System voltage
12 V
Battery group size
Group 31
Cold cranking amps
800 CCA
RP

Replacement battery

What to match when buying

Use a heavy-duty 12 V starting battery in BCI Group 31 with about 800 CCA (or higher), provided the case dimensions, hold-down and terminal orientation match. AGM is a good upgrade for vibration resistance; verify the machine serial number before purchase.

LC

Battery location

Where the battery is mounted

Family-match guidance: The battery on the Gehl SL 5640 DXT Dual skid steer loader is typically located under the operator's seat or in a compartment near the rear of the machine. For specific details on battery replacement, it's best to consult the owner's manual or contact a local Gehl dealer. Verify the exact access panel/compartment for the machine serial number before service.

ID

Model details

Equipment identity

Brand
Gehl
Model
SL 5640 DXT
Equipment class
Skid-Steer Loader
HOW

How to replace the battery

Basic replacement procedure

Park on level ground, lower the lift arms/attachment, stop the engine, remove the key and isolate electrical power. Open the battery access, disconnect the negative cable first and then positive, remove the hold-down and lift out the battery. Clean the tray/terminals, install the replacement securely, connect positive first and negative last, then verify charging voltage and starting operation.

!

Bad battery symptoms

Signs the battery may be failing

Common signs are slow or no cranking, repeated clicking from the starter/solenoid, dim or flickering lights/display, electronics resetting during crank, needing frequent jump-starts, rapid self-discharge, corroded/swollen battery case, or resting voltage that quickly falls under load. Confirm cable condition and alternator output before condemning the battery.

?

What battery size fits the Gehl SL 5640 DXT?

Quick answer

The official battery group size for the Gehl SL 5640 DXT skid steer loader is Group 31. For replacement, it's important to check the specific battery specifications to ensure compatibility.

?

How many CCA does the Gehl SL 5640 DXT need?

Quick answer

The recommended battery for the Gehl SL 5640 DXT skid steer loader typically has a Cold Cranking Amps (CCA) rating of around 650 to 800 CCA. Always check the specific model's manual or consult with a dealer for the exact specifications.

?

What voltage battery does the Gehl SL 5640 DXT use?

Quick answer

The official battery voltage for the Gehl SL 5640 DXT skid steer loader is 12 volts. For replacement, it's important to check the specific model's manual for detailed specifications.

?

Where is the battery on the Gehl SL 5640 DXT?

Quick answer

Family-match guidance: The battery on the Gehl SL 5640 DXT Dual skid steer loader is typically located under the operator's seat or in a compartment near the rear of the machine. For specific details on battery replacement, it's best to consult the owner's manual or contact a local Gehl dealer. Verify the exact access panel/compartment for the machine serial number before service.

?

What is the best replacement battery for the Gehl SL 5640 DXT?

Quick answer

Use a heavy-duty 12 V starting battery in BCI Group 31 with about 800 CCA (or higher), provided the case dimensions, hold-down and terminal orientation match. AGM is a good upgrade for vibration resistance; verify the machine serial number before purchase.

Disclaimer: Battery specifications are for general reference and may vary by year, serial number or configuration. Always verify fitment and electrical requirements before purchase or installation. See the Gehl website for manufacturer information.