The Gehl SL 5635 Serie II skid-steer battery size is Group 31, and it uses a 12-volt electrical system. Its 800 CCA rating is average for Gehl skid-steers in this dataset.
ModelSL 5635 Serie II
BrandGehl
Voltage12 V
EquipmentSkid Steer
Voltage
12 V
Cold cranking
800 CCA
Battery size
Group 31
Battery location
See details below
How this battery compares
Compared with other Gehl skid-steer battery ratings in this dataset.
Cold cranking amps800 CCA
Average
LowAverageHigh
Low 105 CCAMedian 800 CCAHigh 950 CCA
BA
Battery specification
Model-specific replacement data
System voltage
12 V
Battery group size
Group 31
Cold cranking amps
800 CCA
RP
Replacement battery
What to match when buying
The best replacement battery for a Gehl SL 5635 Serie II skid steer loader is a flooded lead-acid battery with 950 cold cranking amps (CCA) and Group 31 size, featuring M6 stud terminals.
LC
Battery location
Where the battery is mounted
The battery on the Gehl SL 5635 Serie II skid steer loader is typically located under the seat or in the rear compartment of the machine. For specific details, it's best to consult the owner's manual or contact a local Gehl dealer.
ID
Model details
Equipment identity
Brand
Gehl
Model
SL 5635 Serie II
Equipment class
Skid-Steer Loader
HOW
How to replace the battery
Basic replacement procedure
To replace the battery on a Gehl SL 5635 Serie II skid steer loader, first, disconnect the negative terminal followed by the positive terminal. Then, remove the old battery and install the new one by connecting the positive terminal first, followed by the negative terminal.
!
Bad battery symptoms
Signs the battery may be failing
Common signs are slow or no cranking, repeated clicking from the starter/solenoid, dim or flickering lights/display, electronics resetting during crank, needing frequent jump-starts, rapid self-discharge, corroded/swollen battery case, or resting voltage that quickly falls under load. Confirm cable condition and alternator output before condemning the battery.
?
What battery size fits the Gehl SL 5635 Serie II?
Quick answer
The official battery group size for the Gehl SL 5635 Serie II skid steer loader is Group 31. For replacement, it's recommended to use a battery that meets the specifications outlined by Gehl.
?
How many CCA does the Gehl SL 5635 Serie II need?
Quick answer
800 CCA. Best available fitment is based on closest same-brand/model-family match (SL 5640 DXT); an equal-or-higher CCA replacement is acceptable if the physical size and terminals match.
?
What voltage battery does the Gehl SL 5635 Serie II use?
Quick answer
The Gehl SL5635 Serie II skid steer loader uses a 12-volt battery. For replacement, it's important to check the specific model and year to ensure compatibility.
?
Where is the battery on the Gehl SL 5635 Serie II?
Quick answer
The battery on the Gehl SL 5635 Serie II skid steer loader is typically located under the seat or in the rear compartment of the machine. For specific details, it's best to consult the owner's manual or contact a local Gehl dealer.
?
What is the best replacement battery for the Gehl SL 5635 Serie II?
Quick answer
The best replacement battery for a Gehl SL 5635 Serie II skid steer loader is a flooded lead-acid battery with 950 cold cranking amps (CCA) and Group 31 size, featuring M6 stud terminals.
Disclaimer: Battery specifications are for general reference and may vary by year, serial number or configuration. Always verify fitment and electrical requirements before purchase or installation. See the Gehl website for manufacturer information.
