Weight summary
The published Farmall 966 weight is 11,116–13,500 lb (5,042–6,123 kg). The primary figure used for comparisons is 11,116 lb (5,042 kg), listed as Operating — gear. The published configurations span 2,384 lb, a 21.4% difference from the lightest listed setup.
How this weight compares
Row-Crop Tractor peers · 510 tractors in the benchmark.
Average
Low and high use the 10th and 90th percentiles of the peer group, which keeps one unusually light or heavy tractor from distorting the scale. Average is the peer-group mean.
Tractor profile
Model information
| Manufacturer | Farmall |
|---|---|
| Model | 966 |
| Category | Farm tractor |
| Model years | 1971 – 1976 |
| Tractor type | Row-Crop Tractor |
| Published weight variants | 3 |
Weight variants
Shipping, operating, ballasted and drivetrain/configuration weights are kept separate when the source publishes them separately.
| Weight type | Configuration | Weight | Metric | US tons | Variant / note |
|---|---|---|---|---|---|
| Operating | gear | 11,116 lb | 5,042 kg | 5.56 | — |
| Operating | hydro | 11,700 lb | 5,307 kg | 5.85 | — |
| Ballasted | — | 13,500 lb | 6,123 kg | 6.75 | — |
How configuration changes the weight
Technical details
Dimensions
Power & weight ratios
Transport snapshot
Weight context
Tractors with similar weight
Useful reference points from the same dataset.
Closest by published weight
- International Harvester 966 (11116 lb)
- John Deere 6420 (11110 lb)
- Massey Ferguson 1134 (11135 lb)
- John Deere 4235 (11070 lb)
- Case IH CS 110 (11056 lb)
Closest comparable tractors
- International Harvester 966 (11116 lb, 113 hp)
- Massey Ferguson 2640 (11200 lb, 110 hp)
- Case IH Maxxum 115 (10900 lb, 115 hp)
- Massey Ferguson 6465 (10955 lb, 118 hp)
- John Deere 4730 (10900 lb, 117 hp)
Farmall 966 weight FAQ
How much does a Farmall 966 weigh?
The Farmall 966 weighs 11,116 lb (5,042 kg) using the published Operating — gear figure. Across the published configurations on this page, weight ranges from 11,116 to 13,500 lb (5,042 to 6,123 kg).
How much does the hydrostatic Farmall 966 weigh compared with the gear-drive version?
The published hydrostatic weight is 11,700 lb (5,307 kg), while gear-drive configurations are 11,116 lb (5,042 kg). The exact difference depends on drivetrain as well as transmission, so the configuration table above is the safest like-for-like reference.
What is the operating weight of the Farmall 966?
The published operating weight is 11,116–11,700 lb (5,042–5,307 kg). This is usually a more useful real-world figure than a bare shipping specification, although ballast, loader, fuel, implements and tire setup can still increase actual working weight.
How much does the Farmall 966 weigh with ballast?
The published ballasted weight is 13,500 lb (6,123 kg). That is up to 2,384 lb (21.4%) above the lightest published configuration. Ballast can therefore change the practical hauling and ground-pressure picture substantially on this model.
Is the Farmall 966 heavy or light for a row-crop tractor?
It is close to average for its peer group. The representative figure sits at about the 34th percentile, near the middle of the row-crop tractor peers. That puts it in the average range for this comparison. It is 2,890 lb lighter than the peer-group average of 14,006 lb.
How wide is the Farmall 966 for transport?
The maximum published tractor width is 98 in (8.2 ft). That is 4 in under 8.5 ft before allowing for a loader, duals, implements or other equipment that may increase transport width.
