The Case IH Farmall 40 tractor weighs 3,252 lb (1,475 kg) using its published Weight hydro ROPS weight. Other useful published figures are 4,402 lb (Weight — hydro cab) and 3,433 lb (Weight — gear ROPS). That places it around the 34th percentile among comparable utility tractors, on the lighter side of its peer group.
The published Case IH Farmall 40 weight is 3,252–4,402 lb (1,475–1,996 kg). The primary figure used for comparisons is 3,252 lb (1,475 kg), listed as Weight — hydro ROPS. The published configurations span 1,150 lb, a 35.4% difference from the lightest listed setup.
Tractor-weight benchmark
How this weight compares
Utility Tractor peers · 1,294 tractors in the benchmark.
Representative published weight
Average
3,252 lb
Low1,537 lb
This model3,252 lb
Average5,263 lb
High9,595 lb
Low and high use the 10th and 90th percentiles of the peer group, which keeps one unusually light or heavy tractor from distorting the scale. Average is the peer-group mean.
At a glance
Tractor profile
Published weight3,252–4,402 lb (1,475–1,996 kg)
Overall weight bandMidweight
Tractor typeUtility Tractor
Primary horsepower40 hp / 29.8 kW
Max length125.2 in (318 cm)
Max width66.6 in (169.2 cm)
Overview
Model information
Manufacturer
Case IH
Model
Farmall 40
Category
Farm tractor
Model years
2008 – 2011
Tractor type
Utility Tractor
Published weight variants
4
Published configurations
Weight variants
Shipping, operating, ballasted and drivetrain/configuration weights are kept separate when the source publishes them separately.
Weight type
Configuration
Weight
Metric
US tons
Variant / note
Weight
hydro ROPS
3,252 lb
1,475 kg
1.63
—
Weight
gear ROPS
3,433 lb
1,557 kg
1.72
—
Weight
hydro cab
4,402 lb
1,996 kg
2.2
—
Weight
CVT cab
4,046 lb
1,835 kg
2.02
—
Configuration effect
How configuration changes the weight
1,150 lbLightest to heaviest · 35.4% spread across published variants
Dimensions, power & hauling
Technical details
Dimensions
Wheelbase73.5 in (186 cm)
Length125.2 in (318 cm)
Width66.6 in (169.2 cm)
Height95 in (241 cm)
Power & weight ratios
Primary power40 hp (29.8 kW)
Power basisEngine (gross)
Weight per horsepower81.3 lb/hp
Weight per foot of length311.7 lb/ft
Wheelbase / length58.7%
Transport snapshot
Primary published weight3,252 lb (1,475 kg)
Maximum published weight4,402 lb (1,996 kg)
Maximum US-ton equivalent2.2 US tons
Maximum published width66.6 in (169.2 cm)
Published width over 102 inNo
Weight context
Weight range3,252–4,402 lb (1,475–1,996 kg)
Primary weight basisWeight — hydro ROPS
Peer positionAverage among Utility Tractor peers · 35th percentile
Physical size classBelow-average size
For transport planning, the representative published tractor weight is about 3,252 lb (1.63 US tons); published configurations reach 4,402 lb (2.2 US tons); the widest published tractor dimension is 66.6 in (5.5 ft). Actual transport weight and dimensions can increase with fuel, ballast, a loader, implements, tires and other installed equipment.
Nearby benchmarks
Tractors with similar weight
Useful reference points from the same dataset.
Closest by published weight
John Deere 420 (3250 lb)
John Deere 430 (3250 lb)
Massey Ferguson 835 (3263 lb)
John Deere B (3275 lb)
Kubota MX5000 (3284 lb)
Closest comparable tractors
Mahindra 2540 (3285 lb, 40 hp)
New Holland Boomer 3040 (3295 lb, 40 hp)
Massey Ferguson 1260 (3200 lb, 40 hp)
Massey Ferguson 1740M (3373 lb, 40 hp)
Mahindra 1538 (3186 lb, 38.7 hp)
Common questions
Case IH Farmall 40 weight FAQ
How much does a Case IH Farmall 40 weigh?
The Case IH Farmall 40 weighs 3,252 lb (1,475 kg) using the published Weight — hydro ROPS figure. Across the published configurations on this page, weight ranges from 3,252 to 4,402 lb (1,475 to 1,996 kg).
How much does the hydrostatic Case IH Farmall 40 weigh compared with the gear-drive version?
The published hydrostatic weight is 3,252–4,402 lb (1,475–1,997 kg), while gear-drive configurations are 3,433 lb (1,557 kg). The exact difference depends on drivetrain as well as transmission, so the configuration table above is the safest like-for-like reference.
Is the Case IH Farmall 40 heavy or light for a utility tractor?
It is close to average for its peer group. The representative figure sits at about the 35th percentile, near the middle of the utility tractor peers. That puts it in the average range for this comparison. It is 2,011 lb lighter than the peer-group average of 5,263 lb.
How wide is the Case IH Farmall 40 for transport?
The maximum published tractor width is 66.6 in (5.5 ft). That is 35.4 in under 8.5 ft before allowing for a loader, duals, implements or other equipment that may increase transport width.
What is the Case IH Farmall 40 weight-to-horsepower ratio?
Using the page’s representative 3,252 lb weight and 40 hp power figure, the tractor carries about 81.3 lb per horsepower. A lower lb/hp number means less tractor mass for each horsepower; this is a comparison metric, not a traction or performance rating.
How many tons does the Case IH Farmall 40 weigh?
The representative published weight is about 1.63 US tons, while the full published range is 1.63–2.2 US tons. Loaded transport weight can be higher than the tractor specification.
