The Cub Cadet LT1045 deck belt part number found is 754-04224. The drive belt size found is 95 in (2,413 mm) long by 0.5 in (13 mm) wide.
Cub Cadet LT1045 Belt Size and Part Numbers
| Mower deck belt part number | 754-04224 |
|---|---|
| Drive belt length | 95 in (2,413 mm) |
| Drive belt width | 0.5 in (13 mm) |
| Deck size | 60 in deck |
Belt Size Comparison Chart
Belt length comparison
Belt width comparison
Mower deck size comparison
Cub Cadet LT1045 Belt Notes
| Mower deck belt note | The Cub Cadet LT1045 deck belt part number captured here is 754-04224. Match the old belt, deck size and routing before spending money |
|---|---|
| Drive belt note | The Cub Cadet LT1045 drive or transmission belt measurement captured here is length 95 in (2,413 mm) and width 0.5 in (13 mm). Do not mix it up with the deck belt because the routing and job are different |
| Deck size note | For the Cub Cadet LT1045, deck size is listed as 60 in deck. Always match belt specs to the deck fitted to your machine, not just the tractor model name |
| Fitment note | The blunt rule with the Cub Cadet LT1045: part number beats guesswork. If the belt is off by even a small amount, it can slip, squeal, jump pulleys or wear fast |
Cub Cadet LT1045 Belt Size FAQ
What should you check when fitting a 95 in (2,413 mm) drive belt on the Cub Cadet LT1045?
The drive belt length found is 95 in (2,413 mm). This is a longer mower belt run, so twist, idler alignment and the belt keeper positions matter. A belt can be the right length and still fail if it is routed wrong. Also check the idler spring and pulley grooves because drive belts can slip under load even when they look fine at idle
Why does 0.5 in (13 mm) belt width matter on the Cub Cadet LT1045?
The captured drive belt width is 0.5 in (13 mm). Pulley grooves are cut for a matching belt profile. Wrong width can cause squeal, heat, poor blade speed or fast belt wear
Should you order the Cub Cadet LT1045 belt by tractor model or deck size?
Use both. The deck size captured is 60 in deck, and the captured deck belt value is 754-04224. Model name alone is risky when multiple deck sizes or serial ranges exist
Mistakes do happen. Belt specs can change by year, mower deck, pulley layout, serial range and regional parts catalog. Please check the operator manual, belt routing decal, old belt label and official cubcadet.com before ordering a replacement belt.
