The Cub Cadet LGT 1054 deck belt part number found is 754-04240. The deck belt size found is 95 in (2,413 mm) long by 0.5 in (13 mm) wide. The drive belt part number found is 754-04240. The drive belt size found is 85 in (2,159 mm) long by 0.62 in (16 mm) wide.
Deck belt part #754-04240
Deck belt sizelength 95 in (2,413 mm) and width 0.5 in (13 mm)
Drive belt part #754-04240
Drive belt sizelength 85 in (2,159 mm) and width 0.62 in (16 mm)
Cub Cadet LGT 1054 Belt Size and Part Numbers
Mower deck belt part number
754-04240
Mower deck belt length
95 in (2,413 mm)
Mower deck belt width
0.5 in (13 mm)
Drive belt part number
754-04240
Drive belt length
85 in (2,159 mm)
Drive belt width
0.62 in (16 mm)
Belt Size Comparison Chart
Belt length comparison
This model
95 in
Average
110 in
Low
75 in
High
155 in
Belt width comparison
This model
0.5 in
Average
0.5 in
Low
0.38 in
High
0.75 in
Cub Cadet LGT 1054 Belt Notes
Mower deck belt note
The Cub Cadet LGT 1054 deck belt listing shows part number 754-04240, length 95 in (2,413 mm) and width 0.5 in (13 mm). Confirm the belt against the deck tag, belt decal or parts diagram before ordering
Drive belt note
The Cub Cadet LGT 1054 drive or transmission belt listing shows part number 754-04240, length 85 in (2,159 mm) and width 0.62 in (16 mm). Treat it as partial drive-belt data if no matching width or OEM part number is shown
Fitment note
Belts are cheap until you buy the wrong one twice. On the Cub Cadet LGT 1054, confirm belt route, old belt label and OEM part number before ordering
Cub Cadet LGT 1054 Belt Size FAQ
Is a close belt length good enough for the Cub Cadet LGT 1054 deck?
The deck belt length found is 95 in (2,413 mm). Close is not the same as correct. A belt that is slightly short can overload bearings, while one slightly long can slip or fail to engage the blades cleanly
Should you buy the Cub Cadet LGT 1054 belt by length only?
No. The deck belt width found is 0.5 in (13 mm). That is the common 1/2-inch belt width range. Still match the OEM number because the belt angle, fabric wrap and effective length can differ. Use length, width and OEM part number together where possible
Which Cub Cadet LGT 1054 belt needs more careful length matching?
The deck belt is longer here: deck 95 in (2,413 mm) versus drive 85 in (2,159 mm), about 10 in (254 mm) different. Do not cross-match them just because both are mower belts
Official information note
Mistakes do happen. Belt specs can change by year, mower deck, pulley layout, serial range and regional parts catalog. Please check the operator manual, belt routing decal, old belt label and official cubcadet.com before ordering a replacement belt.
