The Cub Cadet 782 deck belt part number found is 954-3003A. The deck belt size found is 88 in (2,235 mm) long by 0.62 in (16 mm) wide. The drive belt part number found is 954-3003A.
Cub Cadet 782 Belt Size and Part Numbers
| Mower deck belt part number | 954-3003A |
|---|---|
| Mower deck belt length | 88 in (2,235 mm) |
| Mower deck belt width | 0.62 in (16 mm) |
| Drive belt part number | 954-3003A |
Belt Size Comparison Chart
Belt length comparison
Belt width comparison
Cub Cadet 782 Belt Notes
| Mower deck belt note | The Cub Cadet 782 deck belt listing shows part number 954-3003A, length 88 in (2,235 mm) and width 0.62 in (16 mm). Match the old belt, deck size and routing before spending money |
|---|---|
| Drive belt note | The Cub Cadet 782 drive or transmission belt part number captured here is 954-3003A. Do not mix it up with the deck belt because the routing and job are different |
| Fitment note | Belts are cheap until you buy the wrong one twice. On the Cub Cadet 782, confirm belt route, old belt label and OEM part number before ordering |
Cub Cadet 782 Belt Size FAQ
What should you watch when fitting a 88 in (2,235 mm) deck belt on the Cub Cadet 782?
A 88 in (2,235 mm) deck belt leaves little room for sloppy routing. This is a mid-length belt run, so routing and idler position still matter more than just matching a close-looking belt. Before blaming the new belt, compare the belt path to the routing decal and make sure it sits on the correct side of each keeper
Why does 0.62 in (16 mm) belt width matter on the Cub Cadet 782?
The captured deck belt width is 0.62 in (16 mm). Pulley grooves are cut for a matching belt profile. Wrong width can cause squeal, heat, poor blade speed or fast belt wear
Mistakes do happen. Belt specs can change by year, mower deck, pulley layout, serial range and regional parts catalog. Please check the operator manual, belt routing decal, old belt label and official cubcadet.com before ordering a replacement belt.
