The Cub Cadet 1863 deck belt part number found is 954-3001. The deck belt size found is 95 in (2,413 mm) long by 0.5 in (13 mm) wide. The drive belt part number found is 754-0640. The drive belt size found is 92 in (2,337 mm) long by 0.62 in (16 mm) wide.
Deck belt part #954-3001
Deck belt sizelength 95 in (2,413 mm) and width 0.5 in (13 mm)
Drive belt part #754-0640
Drive belt sizelength 92 in (2,337 mm) and width 0.62 in (16 mm)
Cub Cadet 1863 Belt Size and Part Numbers
Mower deck belt part number
954-3001
Mower deck belt length
95 in (2,413 mm)
Mower deck belt width
0.5 in (13 mm)
Drive belt part number
754-0640
Drive belt length
92 in (2,337 mm)
Drive belt width
0.62 in (16 mm)
Belt Size Comparison Chart
Belt length comparison
This model
95 in
Average
110 in
Low
75 in
High
155 in
Belt width comparison
This model
0.5 in
Average
0.5 in
Low
0.38 in
High
0.75 in
Cub Cadet 1863 Belt Notes
Mower deck belt note
The Cub Cadet 1863 deck belt listing shows part number 954-3001, length 95 in (2,413 mm) and width 0.5 in (13 mm). Confirm the belt against the deck tag, belt decal or parts diagram before ordering
Drive belt note
The Cub Cadet 1863 drive or transmission belt listing shows part number 754-0640, length 92 in (2,337 mm) and width 0.62 in (16 mm). Treat it as partial drive-belt data if no matching width or OEM part number is shown
Fitment note
The blunt rule with the Cub Cadet 1863: part number beats guesswork. If the belt is off by even a small amount, it can slip, squeal, jump pulleys or wear fast
Cub Cadet 1863 Belt Size FAQ
Is a close belt length good enough for the Cub Cadet 1863 deck?
The deck belt length found is 95 in (2,413 mm). Close is not the same as correct. A belt that is slightly short can overload bearings, while one slightly long can slip or fail to engage the blades cleanly
Should you buy the Cub Cadet 1863 belt by length only?
No. The deck belt width found is 0.5 in (13 mm). That is the common 1/2-inch belt width range. Still match the OEM number because the belt angle, fabric wrap and effective length can differ. Use length, width and OEM part number together where possible
Official information note
Mistakes do happen. Belt specs can change by year, mower deck, pulley layout, serial range and regional parts catalog. Please check the operator manual, belt routing decal, old belt label and official cubcadet.com before ordering a replacement belt.
