The Cub Cadet 111 deck belt part number found is 954-04240. The deck belt size found is 80 in (2,032 mm) long by 0.38 in (10 mm) wide. The drive belt size found is 95 in (2,413 mm) long by 0.5 in (13 mm) wide.
Cub Cadet 111 Belt Size and Part Numbers
| Mower deck belt part number | 954-04240 |
|---|---|
| Mower deck belt length | 80 in (2,032 mm) |
| Mower deck belt width | 0.38 in (10 mm) |
| Drive belt length | 95 in (2,413 mm) |
| Drive belt width | 0.5 in (13 mm) |
Belt Size Comparison Chart
Belt length comparison
Belt width comparison
Cub Cadet 111 Belt Notes
| Mower deck belt note | The Cub Cadet 111 deck belt listing shows part number 954-04240, length 80 in (2,032 mm) and width 0.38 in (10 mm). Confirm the belt against the deck tag, belt decal or parts diagram before ordering |
|---|---|
| Drive belt note | The Cub Cadet 111 drive or transmission belt measurement captured here is length 95 in (2,413 mm) and width 0.5 in (13 mm). Treat it as partial drive-belt data if no matching width or OEM part number is shown |
| Fitment note | Before ordering a Cub Cadet 111 belt, compare the old belt routing, pulley layout and deck size if available. A close-looking belt can still be wrong |
Cub Cadet 111 Belt Size FAQ
Is a close belt length good enough for the Cub Cadet 111 deck?
The deck belt length found is 80 in (2,032 mm). Close is not the same as correct. A belt that is slightly short can overload bearings, while one slightly long can slip or fail to engage the blades cleanly
Should you buy the Cub Cadet 111 belt by length only?
No. The deck belt width found is 0.38 in (10 mm). That is a narrow belt, so do not casually swap in a 1/2-inch belt unless the parts diagram says it crosses over. Too-wide belts can ride high in the pulley. Use length, width and OEM part number together where possible
Are the Cub Cadet 111 deck and drive belt lengths close?
The deck belt is 80 in (2,032 mm) and the drive belt is 95 in (2,413 mm), about 15 in (381 mm) different. That is enough to treat them as separate belts when ordering
Mistakes do happen. Belt specs can change by year, mower deck, pulley layout, serial range and regional parts catalog. Please check the operator manual, belt routing decal, old belt label and official cubcadet.com before ordering a replacement belt.
