The drive belt size found is 77 in (1,956 mm) long by 0.5 in (13 mm) wide.
Cub Cadet 1000 Belt Size and Part Numbers
| Drive belt length | 77 in (1,956 mm) |
|---|---|
| Drive belt width | 0.5 in (13 mm) |
Belt Size Comparison Chart
Belt length comparison
Belt width comparison
Cub Cadet 1000 Belt Notes
| Drive belt note | The Cub Cadet 1000 drive or transmission belt measurement captured here is length 77 in (1,956 mm) and width 0.5 in (13 mm). This is separate from the mower deck belt |
|---|---|
| Fitment note | Belts are cheap until you buy the wrong one twice. On the Cub Cadet 1000, confirm belt route, old belt label and OEM part number before ordering |
Cub Cadet 1000 Belt Size FAQ
Why can the correct Cub Cadet 1000 drive belt still not pull properly?
The drive belt length found is 77 in (1,956 mm). If the tractor still slips, the belt may be routed wrong, the idler may be weak, or the pulley faces may be polished. Length alone does not fix a worn drive system
Can you replace the Cub Cadet 1000 belt with the same length but different width?
The drive belt width found is 0.5 in (13 mm). That is the common 1/2-inch belt width range. Still match the OEM number because the belt angle, fabric wrap and effective length can differ. A belt with the wrong top width can ride too high or too low in the pulley even if the length looks right
Mistakes do happen. Belt specs can change by year, mower deck, pulley layout, serial range and regional parts catalog. Please check the operator manual, belt routing decal, old belt label and official cubcadet.com before ordering a replacement belt.
