The Caterpillar gp25n forklift (2025-2026) is characterised by below-average engine power at 55 hp (41 kW) and low weight at 7,937 lb (3.6 t). The listed total width is 5.38 ft (1,640 mm).
Specification profile
Forklift • 2025-2026
Weight: 7,937 lb (3.6 t)Engine power: 55 hp (41 kW)Engine speed at max torque: 2,700 rpmTotal Width: 5.38 ft (1,640 mm)
7,937 lb (3.6 t)Weight
55 hp (41 kW)Engine power
2,700 rpmEngine speed at max torque
5.38 ft (1,640 mm)Total Width
7.05 ft (2,150 mm)Construction Height
10.8 ft (3.3 m)Lifting Height
19/19.5 km/hTravel Speed With / Without Load
151/1800 NmMaximum torque
How it compares
Low, average or high?
Engine power
Below average
55 hp (41 kW)
Low 33.5 hp (25 kW)Typical 67.5 hp (50.3 kW)High 112 hp (83.8 kW)
Engine power is below the typical figure.
Weight
Low
7,937 lb (3.6 t)
Low 5,644 lb (2.56 t)Typical 12,143 lb (5.51 t)High 26,358 lb (12 t)
Weight is well below the typical figure.
Turning Radius
Average
7.32 ft (2.23 m)
Low 5.91 ft (1.8 m)Typical 7.95 ft (2.42 m)High 12 ft (3.67 m)
Turning Radius is close to the typical figure.
Construction Height
Average
7.05 ft (2,150 mm)
Low 6.68 ft (2,035 mm)Typical 7.29 ft (2,221 mm)High 8.4 ft (2,561 mm)
Construction Height is close to the typical figure.
Displacement
Low
0.55 US gal (2.06 L)
Low 0.5 US gal (1.9 L)Typical 0.79 US gal (2.99 L)High 1.19 US gal (4.5 L)
Displacement is well below the typical figure.
Lifting Height
Average
10.8 ft (3.3 m)
Low 7.14 ft (2.17 m)Typical 11.1 ft (3.38 m)High 18 ft (5.5 m)
Lifting Height is close to the typical figure.
Visual overview
Key measurements
Measurements
Related measurements grouped for faster scanning.
Related measurements
Additional published measurements that share the same unit.
Overview
Model information
| Manufacturer | Caterpillar |
|---|---|
| Model | gp25n forklift |
| Category | Forklift |
| Model year / production | 2025-2026 |
Full specifications
Technical details
Performance
Engine power55 hp (41 kW)
Maximum torque151/1800 Nm
Engine speed at max torque2,700 rpm
Travel Speed With / Without Load19/19.5 km/h
Dimensions
Construction Height7.05 ft (2,150 mm)
Lifting Height10.8 ft (3.3 m)
Total Width5.38 ft (1,640 mm)
Turning Radius7.32 ft (2.23 m)
Capacity & weight
Weight7,937 lb (3.6 t)
Hoisting With / Without Load0.59/ 0.61 m/s
Lowering With Load0,5/05 m/s
Nominal Load at COG5,512 lb (2.5 t)
Engine & drivetrain
Displacement0.55 US gal (2.06 L)
Engine typeGK21E
Number of cylinders4.0
Setup & fitment
Standard tyresFront: 7.00-12-12PR / Rear: 6.00-9 -10PR
Other specifications
Model seriesGP
Centre of Gravity19.7 in (500 mm)
Max. Climbing Ability30/53 %
Related Posts:
