The Caterpillar 287D skid-steer battery size is Group 65, and it uses a 12-volt electrical system. Its 900 CCA rating is average for Caterpillar skid-steers in this dataset.
Model287D
BrandCaterpillar
Voltage12 V
EquipmentSkid Steer
Voltage
12 V
Cold cranking
900 CCA
Battery size
Group 65
Battery location
See details below
How this battery compares
Compared with other Caterpillar skid-steer battery ratings in this dataset.
Cold cranking amps900 CCA
Average
LowAverageHigh
Low 125 CCAMedian 850 CCAHigh 1400 CCA
BA
Battery specification
Model-specific replacement data
System voltage
12 V
Battery group size
Group 65
Cold cranking amps
900 CCA
RP
Replacement battery
What to match when buying
Use a heavy-duty 12 V starting battery in BCI Group 65 with about 950 CCA (or higher), provided the case dimensions, hold-down and terminal orientation match. AGM is a good upgrade for vibration resistance; verify the machine serial number before purchase.
LC
Battery location
Where the battery is mounted
The battery on the Caterpillar 287D skid steer loader is typically located under the seat or in the rear compartment of the machine. For specific battery specifications and replacement options, you can refer to the official Cat website or your dealer.
ID
Model details
Equipment identity
Brand
Caterpillar
Model
287D
Equipment class
Skid-Steer Loader
HOW
How to replace the battery
Basic replacement procedure
Park on level ground, lower the lift arms/attachment, stop the engine, remove the key and isolate electrical power. Open the battery access, disconnect the negative cable first and then positive, remove the hold-down and lift out the battery. Clean the tray/terminals, install the replacement securely, connect positive first and negative last, then verify charging voltage and starting operation.
!
Bad battery symptoms
Signs the battery may be failing
The most common Caterpillar 287D skid steer loader battery symptoms include an engine that cranks too slowly to start, an alert indicator coming on, dim or flickering lights, and a grinding noise when the ignition key is turned.
?
What battery size fits the Caterpillar 287D?
Quick answer
The official battery group size for the Caterpillar 287D skid steer loader is Group 65 BCI. It is recommended to use a heavy-duty maintenance-free battery with specifications such as 12 volts and approximately 850 cold cranking amps (CCA) for optimal performance.
?
How many CCA does the Caterpillar 287D need?
Quick answer
The recommended battery for the Caterpillar 287D skid steer loader is a 12-Volt heavy-duty maintenance-free battery with a Cold Cranking Amps (CCA) rating of 900. This battery is designed to provide reliable starting power in tough conditions.
?
What voltage battery does the Caterpillar 287D use?
Quick answer
The official battery voltage for the Caterpillar 287D skid steer loader is 12 volts. For replacement, it's important to choose a battery that meets the specifications for heavy-duty performance, such as those offered by Cat batteries.
?
Where is the battery on the Caterpillar 287D?
Quick answer
The battery on the Caterpillar 287D skid steer loader is typically located under the seat or in the rear compartment of the machine. For specific battery specifications and replacement options, you can refer to the official Cat website or your dealer.
?
What is the best replacement battery for the Caterpillar 287D?
Quick answer
Use a heavy-duty 12 V starting battery in BCI Group 65 with about 950 CCA (or higher), provided the case dimensions, hold-down and terminal orientation match. AGM is a good upgrade for vibration resistance; verify the machine serial number before purchase.
Disclaimer: Battery specifications are for general reference and may vary by year, serial number or configuration. Always verify fitment and electrical requirements before purchase or installation. See the Caterpillar website for manufacturer information.
