Case TV380B Battery Size (Group 31)

The Case TV380B skid-steer battery size is Group 31, and it uses a 12-volt electrical system. Its 750 CCA rating is average for Case skid-steers in this dataset.

ModelTV380B
BrandCase
Voltage12 V
EquipmentSkid Steer

Voltage
12 V
Cold cranking
750 CCA
Battery size
Group 31
Battery location
See details below

How this battery compares

Compared with other Case skid-steer battery ratings in this dataset.

Cold cranking amps750 CCA
Average
LowAverageHigh
Low 185 CCAMedian 800 CCAHigh 1835 CCA

BA

Battery specification

Model-specific replacement data

System voltage
12 V
Battery group size
Group 31
Cold cranking amps
750 CCA
RP

Replacement battery

What to match when buying

The best replacement battery for a Case TV380B skid steer loader is a lead-acid or dry starter battery designed for heavy-duty equipment, available from suppliers like TVH, which carries brands such as Varta, Xtreme, and Optima for various skid steer makes including Case.

LC

Battery location

Where the battery is mounted

The battery on the Case TV380B skid steer loader is typically located under the seat or in the rear compartment of the machine. For specific battery specifications and replacement options, it's best to consult the manufacturer's manual or contact a Case dealer.

ID

Model details

Equipment identity

Brand
Case
Model
TV380B
Equipment class
Skid-Steer Loader
HOW

How to replace the battery

Basic replacement procedure

To replace the battery on a Case TV380B skid steer loader, first, disconnect the negative terminal followed by the positive terminal. Then, remove the old battery and install the new one by connecting the positive terminal first, followed by the negative terminal.

!

Bad battery symptoms

Signs the battery may be failing

Common signs are slow or no cranking, repeated clicking from the starter/solenoid, dim or flickering lights/display, electronics resetting during crank, needing frequent jump-starts, rapid self-discharge, corroded/swollen battery case, or resting voltage that quickly falls under load. Confirm cable condition and alternator output before condemning the battery.

?

What battery size fits the Case TV380B?

Quick answer

Group 31. Best available fitment is based on closest same-brand/model-family match (TR380); confirm tray dimensions, terminal layout, and serial number before ordering.

?

How many CCA does the Case TV380B need?

Quick answer

750 CCA. Best available fitment is based on closest same-brand/model-family match (TR380); an equal-or-higher CCA replacement is acceptable if the physical size and terminals match.

?

What voltage battery does the Case TV380B use?

Quick answer

The official battery voltage for the Case TV380B skid steer loader is 12 volts. For replacement, it's important to ensure compatibility with the specific model and its requirements.

?

Where is the battery on the Case TV380B?

Quick answer

The battery on the Case TV380B skid steer loader is typically located under the seat or in the rear compartment of the machine. For specific battery specifications and replacement options, it's best to consult the manufacturer's manual or contact a Case dealer.

?

What is the best replacement battery for the Case TV380B?

Quick answer

The best replacement battery for a Case TV380B skid steer loader is a lead-acid or dry starter battery designed for heavy-duty equipment, available from suppliers like TVH, which carries brands such as Varta, Xtreme, and Optima for various skid steer makes including Case.

Disclaimer: Battery specifications are for general reference and may vary by year, serial number or configuration. Always verify fitment and electrical requirements before purchase or installation. See the Case website for manufacturer information.