Case TR340B Battery Size (Group 31)

The Case TR340B skid-steer battery size is Group 31, and it uses a 12-volt electrical system. Its 1000 CCA rating is high for Case skid-steers in this dataset.

ModelTR340B
BrandCase
Voltage12 V
EquipmentSkid Steer

Voltage
12 V
Cold cranking
1000 CCA
Battery size
Group 31
Battery location
See details below

How this battery compares

Compared with other Case skid-steer battery ratings in this dataset.

Cold cranking amps1000 CCA
High
LowAverageHigh
Low 185 CCAMedian 800 CCAHigh 1835 CCA

BA

Battery specification

Model-specific replacement data

System voltage
12 V
Battery group size
Group 31
Cold cranking amps
1000 CCA
RP

Replacement battery

What to match when buying

Use a heavy-duty 12 V starting battery in BCI Group 31 with about 1000 CCA (or higher), provided the case dimensions, hold-down and terminal orientation match. AGM is a good upgrade for vibration resistance; verify the machine serial number before purchase.

LC

Battery location

Where the battery is mounted

Family-match guidance: The battery on the Case TR340 skid steer loader is typically located under the seat or in the rear compartment of the machine. For specific battery specifications and replacement procedures, refer to the owner's manual or the manufacturer's website. Verify the exact access panel/compartment for the machine serial number before service.

ID

Model details

Equipment identity

Brand
Case
Model
TR340B
Equipment class
Skid-Steer Loader
HOW

How to replace the battery

Basic replacement procedure

Park on level ground, lower the lift arms/attachment, stop the engine, remove the key and isolate electrical power. Open the battery access, disconnect the negative cable first and then positive, remove the hold-down and lift out the battery. Clean the tray/terminals, install the replacement securely, connect positive first and negative last, then verify charging voltage and starting operation.

!

Bad battery symptoms

Signs the battery may be failing

Common symptoms of a bad battery in a Case TR340B skid steer loader include failure to start, intermittent starting issues, and dashboard warning lights. For battery specifications and replacement details, refer to the Case parts manuals.

?

What battery size fits the Case TR340B?

Quick answer

Group 31. Best available fitment is based on closest same-brand/model-family match (SV340B); confirm tray dimensions, terminal layout, and serial number before ordering.

?

How many CCA does the Case TR340B need?

Quick answer

1000 CCA. Best available fitment is based on closest same-brand/model-family match (SV340B); an equal-or-higher CCA replacement is acceptable if the physical size and terminals match.

?

What voltage battery does the Case TR340B use?

Quick answer

12 volts. Skid-steer starting/charging systems for this model family use a 12 V battery system; confirm serial-specific configuration before replacement.

?

Where is the battery on the Case TR340B?

Quick answer

Family-match guidance: The battery on the Case TR340 skid steer loader is typically located under the seat or in the rear compartment of the machine. For specific battery specifications and replacement procedures, refer to the owner's manual or the manufacturer's website. Verify the exact access panel/compartment for the machine serial number before service.

?

What is the best replacement battery for the Case TR340B?

Quick answer

Use a heavy-duty 12 V starting battery in BCI Group 31 with about 1000 CCA (or higher), provided the case dimensions, hold-down and terminal orientation match. AGM is a good upgrade for vibration resistance; verify the machine serial number before purchase.

Disclaimer: Battery specifications are for general reference and may vary by year, serial number or configuration. Always verify fitment and electrical requirements before purchase or installation. See the Case website for manufacturer information.