The Case SR210 skid-steer battery size is Group 31, and it uses a 12-volt electrical system. Its 1000 CCA rating is high for Case skid-steers in this dataset.
ModelSR210
BrandCase
Voltage12 V
EquipmentSkid Steer
Voltage
12 V
Cold cranking
1000 CCA
Battery size
Group 31
Battery location
See details below
How this battery compares
Compared with other Case skid-steer battery ratings in this dataset.
Cold cranking amps1000 CCA
High
LowAverageHigh
Low 185 CCAMedian 800 CCAHigh 1835 CCA
BA
Battery specification
Model-specific replacement data
System voltage
12 V
Battery group size
Group 31
Cold cranking amps
1000 CCA
RP
Replacement battery
What to match when buying
The best replacement battery for a Case SR210 skid steer loader is typically a sealed lead acid battery designed for heavy equipment. For specific specifications, it's recommended to check the manufacturer's guidelines or consult a battery specialist.
LC
Battery location
Where the battery is mounted
The battery on the Case SR210 skid steer loader is typically located under the operator's seat or in a side compartment for easy access. For replacement, consult the official Case SR210 operator's manual for the exact battery specifications and location.
ID
Model details
Equipment identity
Brand
Case
Model
SR210
Equipment class
Skid-Steer Loader
HOW
How to replace the battery
Basic replacement procedure
Park on level ground, lower the lift arms/attachment, stop the engine, remove the key and isolate electrical power. Open the battery access, disconnect the negative cable first and then positive, remove the hold-down and lift out the battery. Clean the tray/terminals, install the replacement securely, connect positive first and negative last, then verify charging voltage and starting operation.
!
Bad battery symptoms
Signs the battery may be failing
Common symptoms of a bad battery in a Case SR210 skid steer loader include failure to start, intermittent starting issues, and dashboard warning lights. For battery specifications and replacement details, refer to the Case parts manuals.
?
What battery size fits the Case SR210?
Quick answer
The official battery group size for the Case SR210 Skid Steer Loader is Group 31. For replacement, it's important to check the specific requirements based on your model and usage.
?
How many CCA does the Case SR210 need?
Quick answer
The recommended battery for the Case SR210 Skid Steer Loader typically has a Cold Cranking Amps (CCA) rating of around 800 to 1000 CCA. It's important to check the specific model requirements for the exact specifications.
?
What voltage battery does the Case SR210 use?
Quick answer
12 volts. Skid-steer starting/charging systems for this model family use a 12 V battery system; confirm serial-specific configuration before replacement.
?
Where is the battery on the Case SR210?
Quick answer
The battery on the Case SR210 skid steer loader is typically located under the operator's seat or in a side compartment for easy access. For replacement, consult the official Case SR210 operator's manual for the exact battery specifications and location.
?
What is the best replacement battery for the Case SR210?
Quick answer
The best replacement battery for a Case SR210 skid steer loader is typically a sealed lead acid battery designed for heavy equipment. For specific specifications, it's recommended to check the manufacturer's guidelines or consult a battery specialist.
Disclaimer: Battery specifications are for general reference and may vary by year, serial number or configuration. Always verify fitment and electrical requirements before purchase or installation. See the Case website for manufacturer information.
