Case IH Vestrum 130 Battery Size + Replacement Guide

Quick answer:

The Case IH Vestrum 130 tractor battery spec found is 12 V with 800 CCA.

Voltage12 V
Cold cranking amps800 CCA

Case IH Vestrum 130 Battery Size Details

Replacement battery recommendation 12 V, 800 CCA
Battery voltage 12 V
Battery CCA 800 CCA

Battery CCA Comparison Chart

Battery CCA comparison

This model

800 CCA

Average

850 CCA

Low

650 CCA

High

1,100 CCA

Benchmarks use practical low, average and high cold-cranking-amp ranges for the utility tractor category. Use the exact battery label and manual before buying.

Case IH Vestrum 130 Extra Battery Notes

Replacement note For the Case IH Vestrum 130, match the replacement battery to the captured spec: 12 V, 800 CCA. Physical fit, terminal layout and hold-down fit still matter
Battery location The battery on the Case IH Vestrum 130 tractor is located under the operator’s seat
Battery replacement steps To replace the battery on a Case IH Vestrum 130 tractor, first, disconnect the negative terminal followed by the positive terminal. Then, remove the old battery and install the new one by connecting the positive terminal first, followed by the negative terminal
Safe removal note Disconnect the negative cable first, then disconnect the positive cable. Install the new battery, connect the positive cable first, then reconnect the negative cable last. That reduces the chance of shorting a tool against the frame
Official information note

Mistakes do happen. Battery specs can change by year, engine, market, terminal layout and installed options. Check the old battery label, operator manual, parts book and official caseih.com website before ordering a replacement battery.