The Case IH Vestrum 120 tractor engine horsepower is 118.4 hp | 88.3 kW, and PTO horsepower is 102 hp | 76.1 kW.
Engine HP118.4 hp | 88.3 kW
PTO HP102 hp | 76.1 kW
PTO Transfer86.1%
Torque449.9 lb-ft | 610.1 Nm
Displacement273.7 ci | 4.5 L
Case IH Vestrum 120 Horsepower Specs
Engine gross horsepower
118.4 hp | 88.3 kW
PTO horsepower claimed
102 hp | 76.1 kW
Case IH Vestrum 120 Useful Horsepower Calculations
PTO-to-engine power transfer
86.1% of engine hp reaches the PTO
Engine size per PTO horsepower
2.7 ci per PTO hp
PTO horsepower per liter
22.7 PTO hp per L
Engine size per engine horsepower
2.3 ci per engine hp
Engine horsepower per liter
26.3 engine hp per L
Torque per PTO horsepower
4.4 lb-ft per PTO hp
Rated speed per PTO horsepower
21.6 rpm per PTO hp
Case IH Vestrum 120 Engine Specs
Engine type
turbocharged diesel
Displacement
273.7 ci | 4.5 L
Bore and stroke
4.094×5.197 inches | 104 x 132 mm
Rated RPM
2200
Torque
449.9 lb-ft | 610.1 Nm
Torque RPM
1300
Case IH Vestrum 120 Fuel, Cooling, Starting & Service Specs
Starter volts
12
Battery volts
12
Case IH Vestrum 120 Horsepower Comparison Charts
Engine horsepower comparison
This model
118.4 hp
Average
80 hp
Low
45 hp
High
120 hp
PTO horsepower comparison
This model
102 hp
Average
65 hp
Low
35 hp
High
105 hp
Displacement comparison
This model
273.7 ci
Average
260 ci
Low
150 ci
High
380 ci
Torque comparison
This model
449.9 lb-ft
Average
240 lb-ft
Low
120 lb-ft
High
420 lb-ft
Rated RPM comparison
This model
2,200 rpm
Average
2,200 rpm
Low
1,800 rpm
High
2,700 rpm
Engine size per PTO HP
This model
2.7 ci/hp
Average
3.5 ci/hp
Low
2.2 ci/hp
High
5.8 ci/hp
Benchmarks use practical low, average and high ranges for the utility tractor category. Use the operator manual and actual engine/tractor configuration before sizing implements or judging working power.
Case IH Vestrum 120 Horsepower FAQ
How much horsepower does the Case IH Vestrum 120 have?
The listed engine output is 118.4 hp, above the 80 hp benchmark average. That is a higher-power result, so ballast, tire setup and implement width matter if you want to use the full 118.4 hp.
How much PTO horsepower does the Case IH Vestrum 120 have?
The listed PTO output is 102 hp, above the 65 hp benchmark average. That is the number to use for mowers, balers, augers, pumps and other PTO tools that need up to about 102 hp.
How much engine power reaches the PTO on the Case IH Vestrum 120?
The PTO-to-engine transfer works out to 86.1%, from 118.4 engine hp to 102 PTO hp. That is a normal usable range for judging PTO implement fit.
How big is the Case IH Vestrum 120 engine?
The engine displacement is 273.7 ci, close to the 260 ci benchmark average. It is close to the normal engine-size range for this horsepower class.
Is the Case IH Vestrum 120 engine stressed for its PTO horsepower?
The engine has about 2.7 cubic inches per PTO hp, using 273.7 ci and 102 PTO hp. That is a smaller-displacement, higher-output style result.
How much PTO horsepower per liter does the Case IH Vestrum 120 make?
The output density is about 22.7 PTO hp per liter, using 102 PTO hp and 4.5 L of displacement. Higher hp/L means more output squeezed from each liter; lower hp/L usually means a more relaxed engine tune.
How much torque does the Case IH Vestrum 120 have?
The listed torque is 449.9 lb-ft, above the 240 lb-ft benchmark average. The 449.9 lb-ft figure is useful for lugging, loader work and heavy PTO load recovery.
Does the Case IH Vestrum 120 have good torque for its PTO horsepower?
The torque-to-PTO-power figure is about 4.4 lb-ft per PTO hp, using 449.9 lb-ft and 102 PTO hp. A higher number usually points to a slower, gruntier working feel.
What rpm is the Case IH Vestrum 120 rated at?
The rated speed is 2,200 rpm, close to the 2,200 rpm benchmark average. The 2,200 rpm figure is around normal for this class.
Official information note
Horsepower and engine specs can vary by year, market, engine option, fuel system, test standard and tractor configuration. Check the operator manual, spec plate, parts book and official caseih.com website before buying parts, sizing implements or making repair decisions.
