The Case IH STX440QT Quadtrac dimension specs found are: width is 44 inches (frame) | 111 cm.
Width44 inches (frame) | 111 cm
Case IH STX440QT Quadtrac Dimensions
Overall width
44 inches (frame) | 111 cm
Case IH STX440QT Quadtrac Weight
Weight
53264 lbs | 24160 kg
Operating weight
51335 lbs | 23285 kg
Case IH STX440QT Quadtrac Dimension Comparison Charts
Width comparison
This model
44 in
Average
96 in
Low
78 in
High
120 in
Weight comparison
This model
51,335 lbs
Average
13,000 lbs
Low
8,000 lbs
High
22,000 lbs
Benchmarks use practical low, average and high dimension ranges for the large ag tractor category. Use the actual tractor, tire setup and operator manual before planning shed, trailer or garage clearance.
Case IH STX440QT Quadtrac Extra Dimension Notes
Storage and fit note
Using the first listed dimension values, the Case IH STX440QT Quadtrac is about 44 inches (frame) | 111 cm wide. Allow extra room for mirrors, ROPS, tire stance, loader brackets, implements and safe walking space around the tractor.
Case IH STX440QT Quadtrac Dimensions FAQ
Is the Case IH STX440QT Quadtrac narrow enough for tight storage?
Yes, based on width alone it is relatively narrow at 44 in, which is below the 96 in benchmark average. That is the better result for tight gates, sheds and trailer decks.
Is the Case IH STX440QT Quadtrac heavy for its size?
The listed weight is heavy for the category at 51,335 lbs, which is above the 13,000 lbs benchmark average. Plan trailer, shed floor and transport decisions around the real operating setup, not just the bare spec.
Official information note
Dimensions can vary by tire size, axle setup, cab, ROPS, ballast and market. Check the operator manual, parts book, old spec plate and official caseih.com website before making shed, trailer, garage or transport decisions.
