The Case IH MX200 Magnum tractor PTO horsepower is 165 hp | 123.0 kW, and the drawbar horsepower is 142.33 hp | 106.1 kW.
PTO HP165 hp | 123.0 kW
Drawbar HP142.33 hp | 106.1 kW
Displacement504.5 ci | 8.3 L
Case IH MX200 Magnum Horsepower Specs
PTO horsepower claimed
165 hp | 123.0 kW
PTO horsepower tested
193.16 hp | 144.0 kW
Drawbar horsepower tested
142.33 hp | 106.1 kW
Case IH MX200 Magnum Useful Horsepower Calculations
Drawbar-to-PTO power ratio
86.3% drawbar hp vs PTO hp
Engine size per PTO horsepower
3.1 ci per PTO hp
PTO horsepower per liter
19.9 PTO hp per L
Fuel tank per PTO horsepower
0.8 gal per PTO hp
Rated speed per PTO horsepower
12.1 rpm per PTO hp
Case IH MX200 Magnum Engine Specs
Engine type
turbocharged aftercooled diesel
Displacement
504.5 ci | 8.3 L
Bore and stroke
4.488×5.315 inches | 114 x 135 mm
Compression
16.5:1
Rated RPM
2000
Case IH MX200 Magnum Fuel, Cooling, Starting & Service Specs
Fuel capacity
130 gal | 492.1 L
Starter volts
12
Battery volts
12
Firing order
1-5-3-6-2-4
Idle RPM
900-2240
Case IH MX200 Magnum Horsepower Comparison Charts
PTO horsepower comparison
This model
165 hp
Average
175 hp
Low
100 hp
High
320 hp
Drawbar horsepower comparison
This model
142.3 hp
Average
150 hp
Low
85 hp
High
280 hp
Displacement comparison
This model
504.5 ci
Average
520 ci
Low
360 ci
High
750 ci
Rated RPM comparison
This model
2,000 rpm
Average
2,100 rpm
Low
1,600 rpm
High
2,500 rpm
Engine size per PTO HP
This model
3.1 ci/hp
Average
3.3 ci/hp
Low
2 ci/hp
High
5.2 ci/hp
Benchmarks use practical low, average and high ranges for the large ag tractor category. Use the operator manual and actual engine/tractor configuration before sizing implements or judging working power.
Case IH MX200 Magnum Horsepower FAQ
How much PTO horsepower does the Case IH MX200 Magnum have?
The listed PTO output is 165 hp, close to the 175 hp benchmark average. Use 165 PTO hp as the practical implement-sizing number.
How much drawbar horsepower does the Case IH MX200 Magnum have?
The listed drawbar output is 142.3 hp, close to the 150 hp benchmark average. It gives a realistic pulling-power figure of about 142.3 hp.
Is the Case IH MX200 Magnum better judged by PTO hp or drawbar hp?
The drawbar output is about 86.3% of PTO output, comparing 142.3 drawbar hp with 165 PTO hp. That helps separate pulling ability from PTO implement ability.
How big is the Case IH MX200 Magnum engine?
The engine displacement is 504.5 ci, close to the 520 ci benchmark average. It is close to the normal engine-size range for this horsepower class.
Is the Case IH MX200 Magnum engine stressed for its PTO horsepower?
The engine has about 3.1 cubic inches per PTO hp, using 504.5 ci and 165 PTO hp. That is close to the normal benchmark for this category.
How much PTO horsepower per liter does the Case IH MX200 Magnum make?
The output density is about 19.9 PTO hp per liter, using 165 PTO hp and 8.3 L of displacement. Higher hp/L means more output squeezed from each liter; lower hp/L usually means a more relaxed engine tune.
What rpm is the Case IH MX200 Magnum rated at?
The rated speed is 2,000 rpm, close to the 2,100 rpm benchmark average. The 2,000 rpm figure is around normal for this class.
Official information note
Horsepower and engine specs can vary by year, market, engine option, fuel system, test standard and tractor configuration. Check the operator manual, spec plate, parts book and official caseih.com website before buying parts, sizing implements or making repair decisions.
