The Case IH MX100C tractor engine horsepower is 100 hp | 74.6 kW, and PTO horsepower is 83 hp | 61.9 kW.
Case IH MX100C Horsepower Specs
| Engine horsepower | 100 hp | 74.6 kW |
|---|---|
| PTO horsepower claimed | 83 hp | 61.9 kW |
Case IH MX100C Useful Horsepower Calculations
| PTO-to-engine power transfer | 83% of engine hp reaches the PTO |
|---|---|
| Engine size per PTO horsepower | 2.9 ci per PTO hp |
| PTO horsepower per liter | 20.8 PTO hp per L |
| Engine size per engine horsepower | 2.4 ci per engine hp |
| Engine horsepower per liter | 25 engine hp per L |
| Fuel tank per PTO horsepower | 0.6 gal per PTO hp |
| Rated speed per PTO horsepower | 26.5 rpm per PTO hp |
Case IH MX100C Engine Specs
| Engine type | turbocharged diesel |
|---|---|
| Displacement | 243.5 ci | 4.0 L |
| Bore and stroke | 3.937×5.00 inches | 100 x 127 mm |
| Compression | 17.25:1 |
| Rated RPM | 2200 |
Case IH MX100C Fuel, Cooling, Starting & Service Specs
| Fuel capacity | 50 gal | 189.2 L |
|---|---|
| Starter volts | 12 |
| Battery volts | 12 |
Case IH MX100C Horsepower Comparison Charts
Engine horsepower comparison
PTO horsepower comparison
Displacement comparison
Rated RPM comparison
Engine size per PTO HP
Benchmarks use practical low, average and high ranges for the utility tractor category. Use the operator manual and actual engine/tractor configuration before sizing implements or judging working power.
Case IH MX100C Horsepower FAQ
How much horsepower does the Case IH MX100C have?
The listed engine output is 100 hp, above the 80 hp benchmark average. That is a higher-power result, so ballast, tire setup and implement width matter if you want to use the full 100 hp.
How much PTO horsepower does the Case IH MX100C have?
The listed PTO output is 83 hp, above the 65 hp benchmark average. That is the number to use for mowers, balers, augers, pumps and other PTO tools that need up to about 83 hp.
How much engine power reaches the PTO on the Case IH MX100C?
The PTO-to-engine transfer works out to 83%, from 100 engine hp to 83 PTO hp. That is a normal usable range for judging PTO implement fit.
How big is the Case IH MX100C engine?
The engine displacement is 243.5 ci, close to the 260 ci benchmark average. It is close to the normal engine-size range for this horsepower class.
Is the Case IH MX100C engine stressed for its PTO horsepower?
The engine has about 2.9 cubic inches per PTO hp, using 243.5 ci and 83 PTO hp. That is a smaller-displacement, higher-output style result.
How much PTO horsepower per liter does the Case IH MX100C make?
The output density is about 20.8 PTO hp per liter, using 83 PTO hp and 4 L of displacement. Higher hp/L means more output squeezed from each liter; lower hp/L usually means a more relaxed engine tune.
What rpm is the Case IH MX100C rated at?
The rated speed is 2,200 rpm, close to the 2,200 rpm benchmark average. The 2,200 rpm figure is around normal for this class.
Horsepower and engine specs can vary by year, market, engine option, fuel system, test standard and tractor configuration. Check the operator manual, spec plate, parts book and official caseih.com website before buying parts, sizing implements or making repair decisions.
