The Case IH Maxxum 100 tractor hydraulic oil capacity was not listed in the scraped specs, but hydraulic pump flow is 21.1 gpm (open center) | 79.9 lpm, and hydraulic type is open center.
Hydraulic Flow21.1 gpm (open center) | 79.9 lpm
Hydraulic Typeopen center
Case IH Maxxum 100 Hydraulic Capacity & Flow Specs
Hydraulic type
open center
Pump flow
21.1 gpm (open center) | 79.9 lpm
Steering flow
10.5 gpm | 39.7 lpm
Case IH Maxxum 100 Useful Hydraulic Calculations
Steering flow vs pump flow
49.8% of listed pump flow
Case IH Maxxum 100 Hydraulic Comparison Charts
Pump flow comparison
This model
21.1 gpm
Average
14 gpm
Low
6 gpm
High
28 gpm
Benchmarks use practical low, average and high ranges for the utility and row-crop tractor category. These are comparison guides only; use the operator manual and exact tractor configuration before buying parts, oil, loaders or hydraulic implements.
Case IH Maxxum 100 Steering, Brakes & Mechanical Hydraulic Notes
Steering
Power steering
Brakes
Hydraulic wet disc brakes
Case IH Maxxum 100 Hydraulic Capacity FAQ
Why is the Case IH Maxxum 100 hydraulic oil capacity not shown here?
The scraped specs do not list a hydraulic oil capacity for the Case IH Maxxum 100, but pump flow is 21.1 gpm (open center) | 79.9 lpm and system type is open center. For oil fill amount, use the manual or fill/check procedure, not pump flow or pressure.
Will the Case IH Maxxum 100 hydraulics feel fast or slow?
The useful speed clue is 21.1 gpm (open center) | 79.9 lpm pump flow, above the 14 gpm benchmark for this group. That is the spec that helps loader cycle speed, remote response and hydraulic implement speed.
What matters most for loader speed on the Case IH Maxxum 100?
On the Case IH Maxxum 100, 21.1 gpm (open center) | 79.9 lpm pump flow points to quicker loader and cylinder movement. Flow is the speed number; pressure and lift are the force numbers.
How do you judge hydraulic implement fit on the Case IH Maxxum 100?
For implement matching, the useful checks are 21.1 gpm flow. That combination is fast enough on paper for quicker cylinder movement than many tractors in this size group, so match the implement by hydraulic demand, hitch category and actual tractor setup rather than model name alone.
Will the Case IH Maxxum 100 hydraulics handle long hydraulic jobs?
The useful heat clues are 21.1 gpm flow. Heat risk still depends on load, duty cycle, oil level, cooler condition and implement demand.
What hydraulic system does the Case IH Maxxum 100 use?
The hydraulic system is listed as open center with 21.1 gpm (open center) | 79.9 lpm pump flow. The system type tells you how the hydraulics are arranged; the flow and pressure numbers tell you more about real-world speed and force.
What should you check before servicing the Case IH Maxxum 100 hydraulics?
For service planning, the system is listed as open center and flow is listed at 21.1 gpm. Use the dipstick or sight glass and the operator manual as the final source before servicing.
Official information note
Hydraulic capacity, pressure, flow, valves, remotes and lift specs can vary by year, market, transmission, pump option, loader package and tractor configuration. Check the operator manual, hydraulic oil dipstick/sight glass, parts book and official caseih.com website before buying hydraulic oil, servicing the system or sizing hydraulic implements.
