Case IH Magnum 180 Horsepower & PTO HP

Quick answer:

The Case IH Magnum 180 tractor engine horsepower is 180 hp | 134.2 kW, PTO horsepower is 150 hp | 111.9 kW, and the drawbar horsepower is 132.7 hp | 99.0 kW.

Engine HP180 hp | 134.2 kW
PTO HP150 hp | 111.9 kW
Drawbar HP132.7 hp | 99.0 kW
PTO Transfer83.3%
Displacement410.6 ci | 6.7 L

Case IH Magnum 180 Horsepower Specs

Engine horsepower 180 hp | 134.2 kW
PTO horsepower claimed 150 hp | 111.9 kW
PTO horsepower tested 179.8 hp | 134.1 kW
Drawbar horsepower tested 132.7 hp | 99.0 kW

Case IH Magnum 180 Useful Horsepower Calculations

PTO-to-engine power transfer 83.3% of engine hp reaches the PTO
Drawbar-to-engine power transfer 73.7% of engine hp reaches the drawbar
Drawbar-to-PTO power ratio 88.5% drawbar hp vs PTO hp
Engine size per PTO horsepower 2.7 ci per PTO hp
PTO horsepower per liter 22.4 PTO hp per L
Engine size per engine horsepower 2.3 ci per engine hp
Engine horsepower per liter 26.9 engine hp per L
Fuel tank per PTO horsepower 0.8 gal per PTO hp
Rated speed per PTO horsepower 14.7 rpm per PTO hp

Case IH Magnum 180 Engine Specs

Engine model year
Engine type turbocharged intercooled diesel
Displacement 410.6 ci | 6.7 L
Bore and stroke 4.094×5.197 inches | 104 x 132 mm
Compression 16.5:1
Emissions Tier 3
Rated RPM 2200

Case IH Magnum 180 Fuel, Cooling, Starting & Service Specs

Fuel capacity 118 gal | 446.6 L
Starter volts 12

Case IH Magnum 180 Horsepower Comparison Charts

Engine horsepower comparison

This model

180 hp

Average

210 hp

Low

120 hp

High

380 hp

PTO horsepower comparison

This model

150 hp

Average

175 hp

Low

100 hp

High

320 hp

Drawbar horsepower comparison

This model

132.7 hp

Average

150 hp

Low

85 hp

High

280 hp

Displacement comparison

This model

410.6 ci

Average

520 ci

Low

360 ci

High

750 ci

Rated RPM comparison

This model

2,200 rpm

Average

2,100 rpm

Low

1,600 rpm

High

2,500 rpm

Engine size per PTO HP

This model

2.7 ci/hp

Average

3.3 ci/hp

Low

2 ci/hp

High

5.2 ci/hp

Benchmarks use practical low, average and high ranges for the large ag tractor category. Use the operator manual and actual engine/tractor configuration before sizing implements or judging working power.

Case IH Magnum 180 Horsepower FAQ

How much horsepower does the Case IH Magnum 180 have?

The listed engine output is 180 hp, below the 210 hp benchmark average. That is a lower-power result, so the smarter match is lighter implements and jobs that do not demand more than about 180 hp.

How much PTO horsepower does the Case IH Magnum 180 have?

The listed PTO output is 150 hp, below the 175 hp benchmark average. For real use, size PTO implements below or near 150 hp rather than using a bigger engine-horsepower number.

How much drawbar horsepower does the Case IH Magnum 180 have?

The listed drawbar output is 132.7 hp, close to the 150 hp benchmark average. It gives a realistic pulling-power figure of about 132.7 hp.

How much engine power reaches the PTO on the Case IH Magnum 180?

The PTO-to-engine transfer works out to 83.3%, from 180 engine hp to 150 PTO hp. That is a normal usable range for judging PTO implement fit.

How efficient is the Case IH Magnum 180 for pulling work?

The drawbar-to-engine transfer is about 73.7%, from 180 engine hp to 132.7 drawbar hp. That gives a more grounded pulling estimate than engine horsepower alone.

Is the Case IH Magnum 180 better judged by PTO hp or drawbar hp?

The drawbar output is about 88.5% of PTO output, comparing 132.7 drawbar hp with 150 PTO hp. That helps separate pulling ability from PTO implement ability.

How big is the Case IH Magnum 180 engine?

The engine displacement is 410.6 ci, below the 520 ci benchmark average. Smaller displacement usually means less engine size behind each horsepower number.

Is the Case IH Magnum 180 engine stressed for its PTO horsepower?

The engine has about 2.7 cubic inches per PTO hp, using 410.6 ci and 150 PTO hp. That is a smaller-displacement, higher-output style result.

How much PTO horsepower per liter does the Case IH Magnum 180 make?

The output density is about 22.4 PTO hp per liter, using 150 PTO hp and 6.7 L of displacement. Higher hp/L means more output squeezed from each liter; lower hp/L usually means a more relaxed engine tune.

Official information note

Horsepower and engine specs can vary by year, market, engine option, fuel system, test standard and tractor configuration. Check the operator manual, spec plate, parts book and official caseih.com website before buying parts, sizing implements or making repair decisions.