The Case IH JX70 tractor engine horsepower is 62 hp | 46.2 kW, and PTO horsepower is 52 hp | 38.8 kW.
Engine HP62 hp | 46.2 kW
PTO HP52 hp | 38.8 kW
PTO Transfer83.9%
Torque184.4 lb-ft | 250.0 Nm
Displacement179 ci | 2.9 L
Case IH JX70 Horsepower Specs
Engine gross horsepower
62 hp | 46.2 kW
PTO horsepower claimed
52 hp | 38.8 kW
Case IH JX70 Useful Horsepower Calculations
PTO-to-engine power transfer
83.9% of engine hp reaches the PTO
Engine size per PTO horsepower
3.4 ci per PTO hp
PTO horsepower per liter
17.9 PTO hp per L
Engine size per engine horsepower
2.9 ci per engine hp
Engine horsepower per liter
21.4 engine hp per L
Torque per PTO horsepower
3.5 lb-ft per PTO hp
Rated speed per PTO horsepower
48.1 rpm per PTO hp
Case IH JX70 Engine Specs
Engine type
turbocharged diesel
Displacement
179 ci | 2.9 L
Rated RPM
2500
Torque
184.4 lb-ft | 250.0 Nm
Torque RPM
1500
Case IH JX70 Fuel, Cooling, Starting & Service Specs
Starter volts
12
Battery volts
12
Case IH JX70 Horsepower Comparison Charts
Engine horsepower comparison
This model
62 hp
Average
80 hp
Low
45 hp
High
120 hp
PTO horsepower comparison
This model
52 hp
Average
65 hp
Low
35 hp
High
105 hp
Displacement comparison
This model
179 ci
Average
260 ci
Low
150 ci
High
380 ci
Torque comparison
This model
184.4 lb-ft
Average
240 lb-ft
Low
120 lb-ft
High
420 lb-ft
Rated RPM comparison
This model
2,500 rpm
Average
2,200 rpm
Low
1,800 rpm
High
2,700 rpm
Engine size per PTO HP
This model
3.4 ci/hp
Average
3.5 ci/hp
Low
2.2 ci/hp
High
5.8 ci/hp
Benchmarks use practical low, average and high ranges for the utility tractor category. Use the operator manual and actual engine/tractor configuration before sizing implements or judging working power.
Case IH JX70 Horsepower FAQ
How much horsepower does the Case IH JX70 have?
The listed engine output is 62 hp, below the 80 hp benchmark average. That is a lower-power result, so the smarter match is lighter implements and jobs that do not demand more than about 62 hp.
How much PTO horsepower does the Case IH JX70 have?
The listed PTO output is 52 hp, below the 65 hp benchmark average. For real use, size PTO implements below or near 52 hp rather than using a bigger engine-horsepower number.
How much engine power reaches the PTO on the Case IH JX70?
The PTO-to-engine transfer works out to 83.9%, from 62 engine hp to 52 PTO hp. That is a normal usable range for judging PTO implement fit.
How big is the Case IH JX70 engine?
The engine displacement is 179 ci, below the 260 ci benchmark average. Smaller displacement usually means less engine size behind each horsepower number.
Is the Case IH JX70 engine stressed for its PTO horsepower?
The engine has about 3.4 cubic inches per PTO hp, using 179 ci and 52 PTO hp. That is close to the normal benchmark for this category.
How much PTO horsepower per liter does the Case IH JX70 make?
The output density is about 17.9 PTO hp per liter, using 52 PTO hp and 2.9 L of displacement. Higher hp/L means more output squeezed from each liter; lower hp/L usually means a more relaxed engine tune.
How much torque does the Case IH JX70 have?
The listed torque is 184.4 lb-ft, below the 240 lb-ft benchmark average. With 184.4 lb-ft listed, gearing matters more when the tractor is loaded hard.
Does the Case IH JX70 have good torque for its PTO horsepower?
The torque-to-PTO-power figure is about 3.5 lb-ft per PTO hp, using 184.4 lb-ft and 52 PTO hp. A higher number usually points to a slower, gruntier working feel.
What rpm is the Case IH JX70 rated at?
The rated speed is 2,500 rpm, above the 2,200 rpm benchmark average. A higher 2,500 rpm rating can make power well but may feel busier under load.
Official information note
Horsepower and engine specs can vary by year, market, engine option, fuel system, test standard and tractor configuration. Check the operator manual, spec plate, parts book and official caseih.com website before buying parts, sizing implements or making repair decisions.
