The Case IH Farmall DX60 dimensions found are: length is 137.3 inches | 348 cm, width is 64.4 inches (min) | 163 cm, height is 95 inches | 241 cm, and wheelbase is 74.8 inches | 189 cm.
Length137.3 inches | 348 cm
Width64.4 inches (min) | 163 cm
Height95 inches | 241 cm
Wheelbase74.8 inches | 189 cm
Case IH Farmall DX60 Dimensions
Overall length
137.3 inches | 348 cm
Overall width
64.4 inches (min) | 163 cm
Overall height
ROPS: 95 inches | 241 cm
Wheelbase
74.8 inches | 189 cm
Case IH Farmall DX60 Weight
Weight
4209 lbs (synchro) | 1909 kg
Case IH Farmall DX60 Dimension Comparison Charts
Length comparison
This model
137.3 in
Average
145 in
Low
120 in
High
175 in
Width comparison
This model
64.4 in
Average
74 in
Low
60 in
High
90 in
Height comparison
This model
95 in
Average
100 in
Low
86 in
High
120 in
Wheelbase comparison
This model
74.8 in
Average
86 in
Low
70 in
High
105 in
Weight comparison
This model
4,209 lbs
Average
5,500 lbs
Low
3,500 lbs
High
8,000 lbs
Floor space footprint
This model
61 sq ft
Average
75 sq ft
Low
50 sq ft
High
110 sq ft
Benchmarks use practical low, average and high dimension ranges for the utility tractor category. Use the actual tractor, tire setup and operator manual before planning shed, trailer or garage clearance.
Case IH Farmall DX60 Extra Dimension Notes
Storage and fit note
Using the first listed dimension values, the Case IH Farmall DX60 is about 137.3 inches | 348 cm long, about 64.4 inches (min) | 163 cm wide, and about 95 inches | 241 cm tall. Allow extra room for mirrors, ROPS, tire stance, loader brackets, implements and safe walking space around the tractor.
Case IH Farmall DX60 Dimensions FAQ
Is the Case IH Farmall DX60 a long tractor?
The Case IH Farmall DX60 has an average listed length at 137.3 in, which is close to the 145 in benchmark average. It is not unusually short or unusually long for this size class.
Is the Case IH Farmall DX60 narrow enough for tight storage?
Yes, based on width alone it is relatively narrow at 64.4 in, which is below the 74 in benchmark average. That is the better result for tight gates, sheds and trailer decks.
Is the Case IH Farmall DX60 tall for a shed or garage?
The listed height is about normal at 95 in, which is close to the 100 in benchmark average. A normal-height result still needs extra clearance for ROPS, cab, exhaust and uneven ground.
How much floor space does the Case IH Farmall DX60 need?
The bare footprint is about 61 sq ft from a 11.4 ft length and 5.4 ft width. That is below the 75 sq ft benchmark for this category.
Does the Case IH Farmall DX60 have a short or long wheelbase?
The wheelbase is short for the category at 74.8 in, which is below the 86 in benchmark average. That points to a more compact chassis length.
Is the Case IH Farmall DX60 heavy for its size?
The listed weight is light for the category at 4,209 lbs, which is below the 5,500 lbs benchmark average. That points to an easier-to-transport tractor than heavier models in the same class, before ballast or attachments are added.
Will the Case IH Farmall DX60 fit easily in storage?
The fit numbers are fairly normal for the category: length 137.3 in, width 64.4 in and height 95 in. It should be judged as an average-size tractor for its benchmark group, not a tiny one.
Official information note
Dimensions can vary by tire size, axle setup, cab, ROPS, ballast and market. Check the operator manual, parts book, old spec plate and official caseih.com website before making shed, trailer, garage or transport decisions.
