The Case IH Farmall 85U tractor hydraulic oil capacity was not listed in the scraped specs, but hydraulic pump flow is 16.1 gpm | 60.9 lpm, hydraulic type is open center, and valves/remotes are listed as 2 rear, 1 mid (Optional).
Hydraulic Flow16.1 gpm | 60.9 lpm
Hydraulic Typeopen center
Valves / Remotes2 rear, 1 mid (Optional)
Lift Capacity5,745 lbs | 2605 kg
Case IH Farmall 85U Hydraulic Capacity & Flow Specs
Hydraulic type
open center
Pump flow
16.1 gpm | 60.9 lpm
Total hydraulic flow
26.5 gpm | 100.3 lpm
Steering flow
10.4 gpm | 39.4 lpm
Hydraulic valves
2 rear, 1 mid (Optional)
Case IH Farmall 85U Hitch, Remote & Lift Specs
Rear hitch type
2
Rear hitch control
mechanical lower-link draft control, Optional electronic draft control (EDC)
Rear lift at 24 inches
5,745 lbs | 2605 kg
Case IH Farmall 85U Useful Hydraulic Calculations
Total flow vs pump flow
164.6% of listed pump flow
Steering flow vs pump flow
64.6% of listed pump flow
Rear lift per pump gpm
356.8 lb per gpm
Case IH Farmall 85U Hydraulic Comparison Charts
Pump flow comparison
This model
16.1 gpm
Average
14 gpm
Low
6 gpm
High
28 gpm
Rear lift comparison
This model
5,745 lb
Average
7,000 lb
Low
3,000 lb
High
12,000 lb
Benchmarks use practical low, average and high ranges for the utility and row-crop tractor category. These are comparison guides only; use the operator manual and exact tractor configuration before buying parts, oil, loaders or hydraulic implements.
Case IH Farmall 85U Steering, Brakes & Mechanical Hydraulic Notes
Steering
hydrostatic power
Brakes
Hydraulic wet disc brakes
Case IH Farmall 85U Hydraulic Capacity FAQ
Why is the Case IH Farmall 85U hydraulic oil capacity not shown here?
The scraped specs do not list a hydraulic oil capacity for the Case IH Farmall 85U, but pump flow is 16.1 gpm | 60.9 lpm, system type is open center, and lift is listed as 5,745 lbs | 2605 kg. For oil fill amount, use the manual or fill/check procedure, not pump flow or pressure.
Will the Case IH Farmall 85U hydraulics feel fast or slow?
The useful speed clue is 16.1 gpm | 60.9 lpm pump flow, above the 14 gpm benchmark for this group. That is the spec that helps loader cycle speed, remote response and hydraulic implement speed.
What matters most for loader speed on the Case IH Farmall 85U?
On the Case IH Farmall 85U, 16.1 gpm | 60.9 lpm pump flow points to quicker loader and cylinder movement and 5,745 lb listed lift is the number to watch for implement weight. Flow is the speed number; pressure and lift are the force numbers.
How do you judge hydraulic implement fit on the Case IH Farmall 85U?
For implement matching, the useful checks are 16.1 gpm flow, 5,745 lb listed lift, 2 rear, 1 mid (Optional) remote/valve listing, and 2 hitch. That combination is fast enough on paper for quicker cylinder movement than many tractors in this size group and best kept realistic on heavy rear implements, so match the implement by hydraulic demand, hitch category and actual tractor setup rather than model name alone.
Is the Case IH Farmall 85U rear lift capacity strong?
The listed lift figure is 5,745 lbs | 2605 kg, below the 7,000 lb benchmark. Keep rear implements realistic and pay attention to weight carried behind the lift points.
Are the Case IH Farmall 85U hydraulic remotes enough?
The Case IH Farmall 85U remote/valve listing is 2 rear, 1 mid (Optional). Because that wording may be optional or configuration-dependent, treat it as a setup check before buying an implement that needs rear hydraulic outlets.
Will the Case IH Farmall 85U hydraulics handle long hydraulic jobs?
The useful heat clues are 16.1 gpm flow. Heat risk still depends on load, duty cycle, oil level, cooler condition and implement demand.
What do the Case IH Farmall 85U hitch hydraulic specs mean?
The hitch-side hydraulic clues are that rear hitch type is 2, hitch control is mechanical lower-link draft control, Optional electronic draft control (EDC), and listed lift is 5,745 lbs | 2605 kg. For real implement choice, hitch category gets it connected, lift capacity gets it raised, and hydraulic flow gets cylinders moving at a usable speed.
What hydraulic system does the Case IH Farmall 85U use?
The hydraulic system is listed as open center with 16.1 gpm | 60.9 lpm pump flow. The system type tells you how the hydraulics are arranged; the flow and pressure numbers tell you more about real-world speed and force.
What should you check before servicing the Case IH Farmall 85U hydraulics?
For service planning, the system is listed as open center and flow is listed at 16.1 gpm. Use the dipstick or sight glass and the operator manual as the final source before servicing.
Official information note
Hydraulic capacity, pressure, flow, valves, remotes and lift specs can vary by year, market, transmission, pump option, loader package and tractor configuration. Check the operator manual, hydraulic oil dipstick/sight glass, parts book and official caseih.com website before buying hydraulic oil, servicing the system or sizing hydraulic implements.
