The Case IH Farmall 80N dimensions found are: length is 148.8 inches | 377 cm, width is 52.9 inches | 134 cm, height is 90 inches | 228 cm, and wheelbase is 96 inches | 243 cm.
Length148.8 inches | 377 cm
Width52.9 inches | 134 cm
Height90 inches | 228 cm
Wheelbase96 inches | 243 cm
Case IH Farmall 80N Dimensions
Overall length
ROPS: 148.8 inches | 377 cm | Cab: 159 inches | 403 cm
Overall width
52.9 inches | 134 cm
Overall height
ROPS: 90 inches | 228 cm | Cab: 91.7 inches | 232 cm
Wheelbase
96 inches | 243 cm
Ground clearance
Frame: 11.2 inches | 28 cm
Case IH Farmall 80N Weight
2WD Cab
5613 lbs | 2546 kg
2WD ROPS
5300 lbs | 2404 kg
4WD Cab
6094 lbs | 2764 kg
4WD ROPS
5886 lbs | 2669 kg
Case IH Farmall 80N Dimension Comparison Charts
Length comparison
This model
148.8 in
Average
145 in
Low
120 in
High
175 in
Width comparison
This model
52.9 in
Average
74 in
Low
60 in
High
90 in
Height comparison
This model
90 in
Average
100 in
Low
86 in
High
120 in
Wheelbase comparison
This model
96 in
Average
86 in
Low
70 in
High
105 in
Ground clearance comparison
This model
11.2 in
Average
15 in
Low
10 in
High
21 in
Floor space footprint
This model
55 sq ft
Average
75 sq ft
Low
50 sq ft
High
110 sq ft
Benchmarks use practical low, average and high dimension ranges for the utility tractor category. Use the actual tractor, tire setup and operator manual before planning shed, trailer or garage clearance.
Case IH Farmall 80N Extra Dimension Notes
Storage and fit note
Using the first listed dimension values, the Case IH Farmall 80N is about 148.8 inches | 377 cm long, about 52.9 inches | 134 cm wide, and about 90 inches | 228 cm tall. Allow extra room for mirrors, ROPS, tire stance, loader brackets, implements and safe walking space around the tractor.
Case IH Farmall 80N Dimensions FAQ
Is the Case IH Farmall 80N a long tractor?
The Case IH Farmall 80N has an average listed length at 148.8 in, which is close to the 145 in benchmark average. It is not unusually short or unusually long for this size class.
Is the Case IH Farmall 80N narrow enough for tight storage?
Yes, based on width alone it is relatively narrow at 52.9 in, which is below the 74 in benchmark average. That is the better result for tight gates, sheds and trailer decks.
Is the Case IH Farmall 80N tall for a shed or garage?
The listed height is low for the category at 90 in, which is below the 100 in benchmark average. That is better for low shed doors, but attachments and ROPS can still change the real clearance needed.
How much floor space does the Case IH Farmall 80N need?
The bare footprint is about 55 sq ft from a 12.4 ft length and 4.4 ft width. That is below the 75 sq ft benchmark for this category.
Does the Case IH Farmall 80N have a short or long wheelbase?
The wheelbase is average for the category at 96 in, which is close to the 86 in benchmark average. It sits near the normal benchmark for this tractor size.
Does the Case IH Farmall 80N have good ground clearance?
The listed ground clearance is low for the category at 11.2 in, which is below the 15 in benchmark average. That is the number to watch if clearance is a buying or storage concern.
Will the Case IH Farmall 80N fit easily in storage?
The fit numbers are fairly normal for the category: length 148.8 in, width 52.9 in and height 90 in. It should be judged as an average-size tractor for its benchmark group, not a tiny one.
Official information note
Dimensions can vary by tire size, axle setup, cab, ROPS, ballast and market. Check the operator manual, parts book, old spec plate and official caseih.com website before making shed, trailer, garage or transport decisions.
