Case IH Farmall 75N Dimensions, Length, Width & Height

Quick answer:

The Case IH Farmall 75N dimensions found are: length is 152 inches | 386 cm, width is 52.9 inches (min) | 134 cm, and wheelbase is 80.1 inches | 203 cm.

Length152 inches | 386 cm
Width52.9 inches (min) | 134 cm
Wheelbase80.1 inches | 203 cm

Case IH Farmall 75N Dimensions

Overall length 152 inches | 386 cm
Overall width 52.9 inches (min) | 134 cm
Wheelbase 2WD: 80.1 inches | 203 cm | 4WD: 81.1 inches | 205 cm
Ground clearance Frame: 10.5 inches | 26 cm

Case IH Farmall 75N Tire Size Notes

Ag front 7.50R18
Ag rear 14.9R28

Case IH Farmall 75N Dimension Comparison Charts

Length comparison

This model

152 in

Average

145 in

Low

120 in

High

175 in

Width comparison

This model

52.9 in

Average

74 in

Low

60 in

High

90 in

Wheelbase comparison

This model

80.1 in

Average

86 in

Low

70 in

High

105 in

Ground clearance comparison

This model

10.5 in

Average

15 in

Low

10 in

High

21 in

Floor space footprint

This model

56 sq ft

Average

75 sq ft

Low

50 sq ft

High

110 sq ft

Benchmarks use practical low, average and high dimension ranges for the utility tractor category. Use the actual tractor, tire setup and operator manual before planning shed, trailer or garage clearance.

Case IH Farmall 75N Extra Dimension Notes

ROPS 87 inches | 220 cm
Cab 90.7 inches | 230 cm
Storage and fit note Using the first listed dimension values, the Case IH Farmall 75N is about 152 inches | 386 cm long and about 52.9 inches (min) | 134 cm wide. Allow extra room for mirrors, ROPS, tire stance, loader brackets, implements and safe walking space around the tractor.

Case IH Farmall 75N Dimensions FAQ

Is the Case IH Farmall 75N a long tractor?

The Case IH Farmall 75N has an average listed length at 152 in, which is close to the 145 in benchmark average. It is not unusually short or unusually long for this size class.

Is the Case IH Farmall 75N narrow enough for tight storage?

Yes, based on width alone it is relatively narrow at 52.9 in, which is below the 74 in benchmark average. That is the better result for tight gates, sheds and trailer decks.

How much floor space does the Case IH Farmall 75N need?

The bare footprint is about 56 sq ft from a 12.7 ft length and 4.4 ft width. That is below the 75 sq ft benchmark for this category.

Does the Case IH Farmall 75N have a short or long wheelbase?

The wheelbase is average for the category at 80.1 in, which is close to the 86 in benchmark average. It sits near the normal benchmark for this tractor size.

Does the Case IH Farmall 75N have good ground clearance?

The listed ground clearance is low for the category at 10.5 in, which is below the 15 in benchmark average. That is the number to watch if clearance is a buying or storage concern.

Official information note

Dimensions can vary by tire size, axle setup, cab, ROPS, ballast and market. Check the operator manual, parts book, old spec plate and official caseih.com website before making shed, trailer, garage or transport decisions.