The Case IH Farmall 45C CVT tractor has multiple listed tire configurations, including 27×10.50-15 at the front and 44×18-20 at the rear. Use the table to match the tractor’s agricultural, turf, industrial and 2WD/4WD setup.
Case IH Farmall 45C CVT Tire Size Chart
Configuration
Tire size
Lawn/turf front
27×10.50-15
Lawn/turf rear
44×18-20
Industrial front
10-16.5
Recommended tire pressure
The recommended tire pressures for a Case IH Farmall 45C CVT depend on the tire size and use; for standard agricultural tires (front 8×16; rear 14.9-24); typical pressures are around 30 psi for the front and 16 psi for the rear when used on the road; while lower pressures are used in the field to reduce soil compaction.
Before buying replacement tires
Match the complete sidewall size, rim diameter, axle position, 2WD/4WD configuration and tire type before ordering. On driven front axles, changing overall tire diameter can upset the required front-to-rear rolling ratio.
Tire Pressure
Recommended tire pressure: The recommended tire pressures for a Case IH Farmall 45C CVT depend on the tire size and use; for standard agricultural tires (front 8×16; rear 14.9-24); typical pressures are around 30 psi for the front and 16 psi for the rear when used on the road; while lower pressures are used in the field to reduce soil compaction.
Pressure warning: Confirm the correct pressure in the official operator’s manual and the tire manufacturer’s load-and-pressure chart before inflation.
Wheelbase and Ground Clearance
Wheelbase
73.5 inches 186 cm
Specification disclaimer
These specifications are provided as a reference and may vary by production year, country, axle, wheel package and previous tire changes. Before purchasing, fitting or inflating tires, confirm the specifications using the Case IH official U.S. website, the official operator’s manual and the markings on the tires currently fitted.
