The Case IH Farmall 35A Series II dimensions found are: length is 145.2 inches | 368 cm, width is 66.5 inches | 168 cm, height is 88.2 inches | 224 cm, and wheelbase is 67.5 inches | 171 cm.
Length145.2 inches | 368 cm
Width66.5 inches | 168 cm
Height88.2 inches | 224 cm
Wheelbase67.5 inches | 171 cm
Case IH Farmall 35A Series II Dimensions
Overall length
145.2 inches | 368 cm
Overall width
66.5 inches | 168 cm
Overall height
ROPS: 88.2 inches | 224 cm
Wheelbase
67.5 inches | 171 cm
Case IH Farmall 35A Series II Weight
Weight
3067 lbs | 1391 kg
Case IH Farmall 35A Series II Tire Size Notes
Lawn/turf front
25×8.50-14
Lawn/turf rear
41×14.00-20
Industrial front
25×8.50-14
Industrial rear
43×16.00-20
Case IH Farmall 35A Series II Dimension Comparison Charts
Length comparison
This model
145.2 in
Average
145 in
Low
120 in
High
175 in
Width comparison
This model
66.5 in
Average
74 in
Low
60 in
High
90 in
Height comparison
This model
88.2 in
Average
100 in
Low
86 in
High
120 in
Wheelbase comparison
This model
67.5 in
Average
86 in
Low
70 in
High
105 in
Weight comparison
This model
3,067 lbs
Average
5,500 lbs
Low
3,500 lbs
High
8,000 lbs
Floor space footprint
This model
67 sq ft
Average
75 sq ft
Low
50 sq ft
High
110 sq ft
Benchmarks use practical low, average and high dimension ranges for the utility tractor category. Use the actual tractor, tire setup and operator manual before planning shed, trailer or garage clearance.
Case IH Farmall 35A Series II Extra Dimension Notes
Storage and fit note
Using the first listed dimension values, the Case IH Farmall 35A Series II is about 145.2 inches | 368 cm long, about 66.5 inches | 168 cm wide, and about 88.2 inches | 224 cm tall. Allow extra room for mirrors, ROPS, tire stance, loader brackets, implements and safe walking space around the tractor.
Case IH Farmall 35A Series II Dimensions FAQ
Is the Case IH Farmall 35A Series II a long tractor?
The Case IH Farmall 35A Series II has an average listed length at 145.2 in, which is close to the 145 in benchmark average. It is not unusually short or unusually long for this size class.
Is the Case IH Farmall 35A Series II narrow enough for tight storage?
The listed width is middle-of-the-pack at 66.5 in, which is close to the 74 in benchmark average. It is not especially narrow, but it is not unusually wide either.
Is the Case IH Farmall 35A Series II tall for a shed or garage?
The listed height is low for the category at 88.2 in, which is below the 100 in benchmark average. That is better for low shed doors, but attachments and ROPS can still change the real clearance needed.
How much floor space does the Case IH Farmall 35A Series II need?
The bare footprint is about 67 sq ft from a 12.1 ft length and 5.5 ft width. That is close to the 75 sq ft benchmark for this category.
Does the Case IH Farmall 35A Series II have a short or long wheelbase?
The wheelbase is short for the category at 67.5 in, which is below the 86 in benchmark average. That points to a more compact chassis length.
Is the Case IH Farmall 35A Series II heavy for its size?
The listed weight is light for the category at 3,067 lbs, which is below the 5,500 lbs benchmark average. That points to an easier-to-transport tractor than heavier models in the same class, before ballast or attachments are added.
Will the Case IH Farmall 35A Series II fit easily in storage?
The fit numbers are fairly normal for the category: length 145.2 in, width 66.5 in and height 88.2 in. It should be judged as an average-size tractor for its benchmark group, not a tiny one.
Official information note
Dimensions can vary by tire size, axle setup, cab, ROPS, ballast and market. Check the operator manual, parts book, old spec plate and official caseih.com website before making shed, trailer, garage or transport decisions.
